All MIBs › Nortel-Magellan-Passport-VncsCallServerMIB › vncsVpPathFailureAction
vncsVpPathFailureAction
Module: Nortel-Magellan-Passport-VncsCallServerMIB
OID (symbolic): Nortel-Magellan-Passport-VncsCallServerMIB::vncsVpPathFailureAction
OID (numeric): 1.3.6.1.4.1.562.2.4.1.44.3.2.1.15
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies whether the application can tolerate momentary interruption of a path while a new path is selected. If disconnectConnection is chosen, the application is informed as soon as possible about a failure by disconnection. If the attribute is set to reRoutePath, the path may attempt an immediate reroute, provided the failure is a recoverable failure. If rerouting fails, the application is informed of the failure. With this option set to reRoutePath, the LCo may wait up to 30 seconds before informing the service of complete disconnection in order to allow both ends to attempt to reconnect. Note that if PLC components are different at both ends only the calling end is allowed to reconnect. All pathTypes respect this attribute. Also on a manualPath with both ends provisioned with independent paths (at least with respect to the failure) this option will have the desired effect that the path is rerouted without complete disconnection at both ends.
What is vncsVpPathFailureAction?
This controls behavior on path failure for calls using this VoiceProfile: disconnectConnection(0, tell the application immediately) or reRoutePath(1, the default, attempt an immediate reroute — waiting up to 30 seconds before declaring disconnection — if the failure is recoverable). Admins choose reRoutePath for profiles where brief interruptions are preferable to a hard disconnect during transient network failures.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.44.3.2.1.15 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-VncsCallServerMIB::vncsVpPathFailureAction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.44.3.2.1.15.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-VncsCallServerMIB::vncsVpPathFailureAction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.44.3.2.1.15.1 i <value>
Start monitoring Nortel Magellan Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-VncsCallServerMIB::vncsVpPathFailureAction OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport switches from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.44 | vncs | Nortel-Magellan-Passport-VncsCallServerMIB |
| 1.3.6.1.4.1.562.2.4.1.44.3 | vncsVp | Nortel-Magellan-Passport-VncsCallServerMIB |
| 1.3.6.1.4.1.562.2.4.1.44.3.2 | vncsVpLCOpsTable | Nortel-Magellan-Passport-VncsCallServerMIB |
| 1.3.6.1.4.1.562.2.4.1.44.3.2.1 | vncsVpLCOpsEntry | Nortel-Magellan-Passport-VncsCallServerMIB |
| 1.3.6.1.4.1.562.2.4.1.44.3.2.1.15 | vncsVpPathFailureAction | Nortel-Magellan-Passport-VncsCallServerMIB |