Nortel-Magellan-Passport-VncsCallServerMIB :: vncsVpMaximumAcceptableCost

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNortel-Magellan-Passport-VncsCallServerMIBvncsVpMaximumAcceptableCost

vncsVpMaximumAcceptableCost

Module: Nortel-Magellan-Passport-VncsCallServerMIB

OID (symbolic): Nortel-Magellan-Passport-VncsCallServerMIB::vncsVpMaximumAcceptableCost

OID (numeric): 1.3.6.1.4.1.562.2.4.1.44.3.2.1.11

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies an upper bound on the cost metric of a route, which is the sum of the cost metrics of all trunks on the route. The cost metric is the trunkCost attribute of the Trunk component. If for any trunk the trunkCost is larger than the maximumAcceptableCost, then that trunk is not considered during the route selection. While a shortest route is being selected, the route cost is being compared with the maximumAcceptableCost attribute, and this is done for any minimization criterion. No route is selected if the cost metric of the shortest route is larger than the maximumAcceptableCost.

What is vncsVpMaximumAcceptableCost?

This sets an upper bound (0-65535, default 1280) on the summed trunk-cost metric for a route using this VoiceProfile; trunks exceeding this individually, or routes exceeding it in total, are excluded from selection. Admins raise this if calls using this profile are failing to route because no sufficiently low-cost path exists.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.44.3.2.1.11
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-VncsCallServerMIB::vncsVpMaximumAcceptableCost

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.44.3.2.1.11.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-VncsCallServerMIB::vncsVpMaximumAcceptableCost.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.44.3.2.1.11.1 i <value>

Start monitoring Nortel Magellan Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-VncsCallServerMIB::vncsVpMaximumAcceptableCost OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport switches from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.44vncsNortel-Magellan-Passport-VncsCallServerMIB
1.3.6.1.4.1.562.2.4.1.44.3vncsVpNortel-Magellan-Passport-VncsCallServerMIB
1.3.6.1.4.1.562.2.4.1.44.3.2vncsVpLCOpsTableNortel-Magellan-Passport-VncsCallServerMIB
1.3.6.1.4.1.562.2.4.1.44.3.2.1vncsVpLCOpsEntryNortel-Magellan-Passport-VncsCallServerMIB
1.3.6.1.4.1.562.2.4.1.44.3.2.1.11vncsVpMaximumAcceptableCostNortel-Magellan-Passport-VncsCallServerMIB