Nortel-Magellan-Passport-VncsCallServerMIB :: vncsVpHoldingPriority

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNortel-Magellan-Passport-VncsCallServerMIBvncsVpHoldingPriority

vncsVpHoldingPriority

Module: Nortel-Magellan-Passport-VncsCallServerMIB

OID (symbolic): Nortel-Magellan-Passport-VncsCallServerMIB::vncsVpHoldingPriority

OID (numeric): 1.3.6.1.4.1.562.2.4.1.44.3.2.1.2

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the priority that a path holds once it is established. Zero is the highest priority and four is the lowest. A path's holdingPriority determines its likelihood of being bumped by a new path to acquire its bandwidth. The setupPriority, a complementary attribute, indicates the priority of a path at establishment time. A new path can bump an existing path if the new path's setupPriority is higher (numerically less) than the existing path's holdingPriority.

What is vncsVpHoldingPriority?

This sets the priority (0=highest, 4=lowest, default 2) that a path holds once established for calls using this VoiceProfile, determining how likely it is to be bumped by a new higher-setup-priority path. Admins raise this (lower the number) so that once a call using this profile is connected, it resists being preempted by newer path setups.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.44.3.2.1.2
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-VncsCallServerMIB::vncsVpHoldingPriority

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.44.3.2.1.2.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-VncsCallServerMIB::vncsVpHoldingPriority.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.44.3.2.1.2.1 i <value>

Start monitoring Nortel Magellan Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-VncsCallServerMIB::vncsVpHoldingPriority OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport switches from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.44vncsNortel-Magellan-Passport-VncsCallServerMIB
1.3.6.1.4.1.562.2.4.1.44.3vncsVpNortel-Magellan-Passport-VncsCallServerMIB
1.3.6.1.4.1.562.2.4.1.44.3.2vncsVpLCOpsTableNortel-Magellan-Passport-VncsCallServerMIB
1.3.6.1.4.1.562.2.4.1.44.3.2.1vncsVpLCOpsEntryNortel-Magellan-Passport-VncsCallServerMIB
1.3.6.1.4.1.562.2.4.1.44.3.2.1.2vncsVpHoldingPriorityNortel-Magellan-Passport-VncsCallServerMIB