Nortel-Magellan-Passport-VncsCallServerMIB :: vncsDPDnDestinationNodeId

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNortel-Magellan-Passport-VncsCallServerMIBvncsDPDnDestinationNodeId

vncsDPDnDestinationNodeId

Module: Nortel-Magellan-Passport-VncsCallServerMIB

OID (symbolic): Nortel-Magellan-Passport-VncsCallServerMIB::vncsDPDnDestinationNodeId

OID (numeric): 1.3.6.1.4.1.562.2.4.1.44.2.2.10.1.1

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute in conjunction with the destinationComponentId attribute identifies the destination of a voice connection. The destinationNodeId and the destinationComponentId attributes are being replaced by the DataNetworkAddress (Dna) attribute. For the migration procedure consult NTP 241-7001-410 'Passport Voice Networking User Guide'. If the destinationComponentId, the destinationNodeId and the Dna attributes are all set, the call routing is based on the destinationNodeId and the destinationComponentId, unless the call is initiated from the Magellan Passport Access (MPA) module, which will use the Dna attribute. The valid destination call identifier settings are: 1. destinationNodeId and destinationNodeId attributes set 2. destinationNodeId, destinationNodeId and Dna attributes set 3. Dna attribute set For calls initiated from the MPA, only options 2 and 3 are valid.

What is vncsDPDnDestinationNodeId?

This is the node ID of the destination for a voice connection, used together with vncsDPDnDestinationComponentId to route calls matching this directory-number prefix. The MIB notes this attribute is being replaced by the DataNetworkAddress (Dna) attribute (vncsDPDnDataNetworkAddress), so admins maintaining older Passport configurations may see both set during migration.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.44.2.2.10.1.1
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-VncsCallServerMIB::vncsDPDnDestinationNodeId

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.44.2.2.10.1.1.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-VncsCallServerMIB::vncsDPDnDestinationNodeId.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.44.2.2.10.1.1.1 i <value>

Start monitoring Nortel Magellan Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-VncsCallServerMIB::vncsDPDnDestinationNodeId OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport switches from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.44vncsNortel-Magellan-Passport-VncsCallServerMIB
1.3.6.1.4.1.562.2.4.1.44.2vncsDPNortel-Magellan-Passport-VncsCallServerMIB
1.3.6.1.4.1.562.2.4.1.44.2.2vncsDPDnNortel-Magellan-Passport-VncsCallServerMIB
1.3.6.1.4.1.562.2.4.1.44.2.2.10vncsDPDnProvTableNortel-Magellan-Passport-VncsCallServerMIB
1.3.6.1.4.1.562.2.4.1.44.2.2.10.1vncsDPDnProvEntryNortel-Magellan-Passport-VncsCallServerMIB
1.3.6.1.4.1.562.2.4.1.44.2.2.10.1.1vncsDPDnDestinationNodeIdNortel-Magellan-Passport-VncsCallServerMIB