Nortel-Magellan-Passport-VcTesterMIB :: vctVcTransferPriorityToNetwork

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-VcTesterMIB › vctVcTransferPriorityToNetwork

vctVcTransferPriorityToNetwork

Module: Nortel-Magellan-Passport-VcTesterMIB

OID (symbolic): Nortel-Magellan-Passport-VcTesterMIB::vctVcTransferPriorityToNetwork

OID (numeric): 1.3.6.1.4.1.562.2.4.1.5130.4.10.1.28

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This attribute displays the priority in which data is transferred to the network.

The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority.

Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput).

When the transfer priority is set at high, the trunk queue is set to high, the routing metric is set to delay.

When the transfer priority is set at normal, the trunk queue is set to normal, the routing metric is set to throughput.

What is vctVcTransferPriorityToNetwork?

Displays the transfer priority (normal or high) applied to data this Vc sends to the network; high priority sets the trunk queue to high and the routing metric to delay, favoring latency over throughput for this call's outbound traffic.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.5130.4.10.1.28
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-VcTesterMIB::vctVcTransferPriorityToNetwork

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.5130.4.10.1.28.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-VcTesterMIB::vctVcTransferPriorityToNetwork.1

Start monitoring Nortel Magellan Passport ATM switch (virtual-circuit test/loopback diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-VcTesterMIB::vctVcTransferPriorityToNetwork OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM switch (virtual-circuit test/loopback diagnostics) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.5130vctNortel-Magellan-Passport-VcTesterMIB
1.3.6.1.4.1.562.2.4.1.5130.4vctVcNortel-Magellan-Passport-VcTesterMIB
1.3.6.1.4.1.562.2.4.1.5130.4.10vctVcCadTableNortel-Magellan-Passport-VcTesterMIB
1.3.6.1.4.1.562.2.4.1.5130.4.10.1vctVcCadEntryNortel-Magellan-Passport-VcTesterMIB
1.3.6.1.4.1.562.2.4.1.5130.4.10.1.28vctVcTransferPriorityToNetworkNortel-Magellan-Passport-VcTesterMIB