Nortel-Magellan-Passport-VcTesterMIB :: vctVcSegmentsRx

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-VcTesterMIB › vctVcSegmentsRx

vctVcSegmentsRx

Module: Nortel-Magellan-Passport-VcTesterMIB

OID (symbolic): Nortel-Magellan-Passport-VcTesterMIB::vctVcSegmentsRx

OID (numeric): 1.3.6.1.4.1.562.2.4.1.5130.4.11.1.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end of the Vc. This counter is updated only when the packet cannot be successfully delivered out of the sink Vc and to the sink AP Conditions in which packets may be discarded by the sink Vc include: missing packets due to subnet discards, segmentation protocol violations due to subnet discard, duplicated and out-of-ranged packets and packets that arrive while Vc is in path recovery state.

What is vctVcSegmentsRx?

Displays the number of segments this Vc has received as of when the command was issued, maintained by accounting at each end. The MIB notes this counter only increments when a packet cannot be successfully delivered out of the sink Vc to the sink access point - e.g. missing packets from subnet discards, segmentation-protocol violations, duplicates, out-of-range packets, or packets arriving during path recovery - so it is really a measure of undeliverable receive traffic, not total volume received.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.5130.4.11.1.3
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-VcTesterMIB::vctVcSegmentsRx

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.5130.4.11.1.3.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-VcTesterMIB::vctVcSegmentsRx.1

Start monitoring Nortel Magellan Passport ATM switch (virtual-circuit test/loopback diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-VcTesterMIB::vctVcSegmentsRx OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM switch (virtual-circuit test/loopback diagnostics) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.5130vctNortel-Magellan-Passport-VcTesterMIB
1.3.6.1.4.1.562.2.4.1.5130.4vctVcNortel-Magellan-Passport-VcTesterMIB
1.3.6.1.4.1.562.2.4.1.5130.4.11vctVcIntdTableNortel-Magellan-Passport-VcTesterMIB
1.3.6.1.4.1.562.2.4.1.5130.4.11.1vctVcIntdEntryNortel-Magellan-Passport-VcTesterMIB
1.3.6.1.4.1.562.2.4.1.5130.4.11.1.3vctVcSegmentsRxNortel-Magellan-Passport-VcTesterMIB