All MIBs › Nortel-Magellan-Passport-VcTesterMIB › vctDnaDefaultTransferPriority
vctDnaDefaultTransferPriority
Module: Nortel-Magellan-Passport-VcTesterMIB
OID (symbolic): Nortel-Magellan-Passport-VcTesterMIB::vctDnaDefaultTransferPriority
OID (numeric): 1.3.6.1.4.1.562.2.4.1.5130.2.11.1.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies the default transfer priority to network for all outgoing calls using this particular Dna. It is overRidden by the transferPriority provisioned in the DLCI Direct Call sub- component.
The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority.
Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput).
When the transfer priority is set at high, the trunk queue is set to high, the routing metric is set to delay.
When the transfer priority is set at normal, the trunk queue is set to normal, the routing metric is set to throughput.
The default of defaultTransferPriority is normal.
What is vctDnaDefaultTransferPriority?
Sets the default transfer priority (normal or high) applied to outgoing calls on this Dna, unless overridden by a DLCI Direct Call sub-component; defaults to normal. High priority sets both the trunk queue and routing metric to favor delay-sensitive delivery, while normal favors throughput - this is the modern replacement for the obsoleted vctDnaOutDefaultPathSensitivity.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.5130.2.11.1.18 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-VcTesterMIB::vctDnaDefaultTransferPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.5130.2.11.1.18.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-VcTesterMIB::vctDnaDefaultTransferPriority.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.5130.2.11.1.18.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> vctDnaDefaultTransferPriority.1
Start monitoring Nortel Magellan Passport ATM switch (virtual-circuit test/loopback diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-VcTesterMIB::vctDnaDefaultTransferPriority OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM switch (virtual-circuit test/loopback diagnostics) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.5130 | vct | Nortel-Magellan-Passport-VcTesterMIB |
| 1.3.6.1.4.1.562.2.4.1.5130.2 | vctDna | Nortel-Magellan-Passport-VcTesterMIB |
| 1.3.6.1.4.1.562.2.4.1.5130.2.11 | vctDnaOutgoingOptionsTable | Nortel-Magellan-Passport-VcTesterMIB |
| 1.3.6.1.4.1.562.2.4.1.5130.2.11.1 | vctDnaOutgoingOptionsEntry | Nortel-Magellan-Passport-VcTesterMIB |
| 1.3.6.1.4.1.562.2.4.1.5130.2.11.1.18 | vctDnaDefaultTransferPriority | Nortel-Magellan-Passport-VcTesterMIB |