Nortel-Magellan-Passport-VcTesterMIB :: vctDnaCugType

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-VcTesterMIB › vctDnaCugType

vctDnaCugType

Module: Nortel-Magellan-Passport-VcTesterMIB

OID (symbolic): Nortel-Magellan-Passport-VcTesterMIB::vctDnaCugType

OID (numeric): 1.3.6.1.4.1.562.2.4.1.5130.2.2.10.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies the Cug type - the Cug is either a national Cug, or an international Cug. International closed user groups are usually established between DTE's for which there is an X.75 Gateway between; whereas national closed user groups are usually established between DTE's for which there is no X.75 Gateway between. (National Cugs cannot normally traverse an X.75 Gateway). If this attribute is set to national, then the Cug is a national Cug, in which case, the dnic should be left at its default value since it is not part of a national Cug. If this attribute is set to international, then the Cug is an international Cug, in which case, the dnic should be set appropriately as part of the Cug interlockCode.

What is vctDnaCugType?

Specifies whether this is a national or international Closed User Group, defaulting to national. International CUGs are normally used between DTEs separated by an X.75 gateway (and require the dnic attribute to be set), while national CUGs, which cannot normally cross such a gateway, leave dnic at its default.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.5130.2.2.10.1.1
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-VcTesterMIB::vctDnaCugType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.5130.2.2.10.1.1.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-VcTesterMIB::vctDnaCugType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.5130.2.2.10.1.1.1 i <value>

Start monitoring Nortel Magellan Passport ATM switch (virtual-circuit test/loopback diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-VcTesterMIB::vctDnaCugType OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM switch (virtual-circuit test/loopback diagnostics) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.5130vctNortel-Magellan-Passport-VcTesterMIB
1.3.6.1.4.1.562.2.4.1.5130.2vctDnaNortel-Magellan-Passport-VcTesterMIB
1.3.6.1.4.1.562.2.4.1.5130.2.2vctDnaCugNortel-Magellan-Passport-VcTesterMIB
1.3.6.1.4.1.562.2.4.1.5130.2.2.10vctDnaCugCugOptionsTableNortel-Magellan-Passport-VcTesterMIB
1.3.6.1.4.1.562.2.4.1.5130.2.2.10.1vctDnaCugCugOptionsEntryNortel-Magellan-Passport-VcTesterMIB
1.3.6.1.4.1.562.2.4.1.5130.2.2.10.1.1vctDnaCugTypeNortel-Magellan-Passport-VcTesterMIB