Nortel-Magellan-Passport-VcTesterMIB :: vctDnaCugPrivileged

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-VcTesterMIB › vctDnaCugPrivileged

vctDnaCugPrivileged

Module: Nortel-Magellan-Passport-VcTesterMIB

OID (symbolic): Nortel-Magellan-Passport-VcTesterMIB::vctDnaCugPrivileged

OID (numeric): 1.3.6.1.4.1.562.2.4.1.5130.2.2.10.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute, if set to yes indicates that this Cug is a privileged Cug. In DPN, at least one side of a call setup within a Cug must have the Cug as a privileged Cug. If set to no, then the Cug is not privileged. If both the local DTE and the remote DTE subscribe to the Cug, but it is not privileged, then the call will be cleared. This attribute is typically used for a host DTE which must accept calls from many other DTE's in which case the other DTE's cannot call one another, but can call the host. In this example, the host would have the privileged Cug, and the other DTE's would belong to the same Cug, but it would not be privileged.

What is vctDnaCugPrivileged?

When set to yes (the default), marks this as a privileged CUG; DPN requires at least one side of any call within a CUG to be privileged, or the call is cleared. The MIB gives the classic example of a host DTE provisioned as privileged so many other non-privileged member DTEs can call it, but not each other.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.5130.2.2.10.1.7
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-VcTesterMIB::vctDnaCugPrivileged

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.5130.2.2.10.1.7.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-VcTesterMIB::vctDnaCugPrivileged.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.5130.2.2.10.1.7.1 i <value>

Start monitoring Nortel Magellan Passport ATM switch (virtual-circuit test/loopback diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-VcTesterMIB::vctDnaCugPrivileged OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM switch (virtual-circuit test/loopback diagnostics) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.5130vctNortel-Magellan-Passport-VcTesterMIB
1.3.6.1.4.1.562.2.4.1.5130.2vctDnaNortel-Magellan-Passport-VcTesterMIB
1.3.6.1.4.1.562.2.4.1.5130.2.2vctDnaCugNortel-Magellan-Passport-VcTesterMIB
1.3.6.1.4.1.562.2.4.1.5130.2.2.10vctDnaCugCugOptionsTableNortel-Magellan-Passport-VcTesterMIB
1.3.6.1.4.1.562.2.4.1.5130.2.2.10.1vctDnaCugCugOptionsEntryNortel-Magellan-Passport-VcTesterMIB
1.3.6.1.4.1.562.2.4.1.5130.2.2.10.1.7vctDnaCugPrivilegedNortel-Magellan-Passport-VcTesterMIB