Nortel-Magellan-Passport-UtpDpnTrunksMIB :: dpnGateUtpControlStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-UtpDpnTrunksMIB › dpnGateUtpControlStatus

dpnGateUtpControlStatus

Module: Nortel-Magellan-Passport-UtpDpnTrunksMIB

OID (symbolic): Nortel-Magellan-Passport-UtpDpnTrunksMIB::dpnGateUtpControlStatus

OID (numeric): 1.3.6.1.4.1.562.2.4.1.61.2.11.1.6

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user.

When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present.

The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics.

The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked.

The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked.

The value suspended indicates that the service has been administratively suspended.

Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)

What is dpnGateUtpControlStatus?

This read-only 1-byte bitmask reports OSI Control status qualifiers for the UTP component — subjectToTest, partOfServicesLocked, reservedForTest, or suspended — with an empty set meaning none apply. Admins check this to see if part of the component's service is administratively restricted or under test.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.61.2.11.1.6
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-UtpDpnTrunksMIB::dpnGateUtpControlStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.61.2.11.1.6.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-UtpDpnTrunksMIB::dpnGateUtpControlStatus.1

Start monitoring Nortel Magellan Passport WAN switch (UTP/copper DPN trunk) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-UtpDpnTrunksMIB::dpnGateUtpControlStatus OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport WAN switch (UTP/copper DPN trunk) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.61dpnGateNortel-Magellan-Passport-DpnTrunksMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.61.2dpnGateUtpNortel-Magellan-Passport-UtpDpnTrunksMIB
1.3.6.1.4.1.562.2.4.1.61.2.11dpnGateUtpStateTableNortel-Magellan-Passport-UtpDpnTrunksMIB
1.3.6.1.4.1.562.2.4.1.61.2.11.1dpnGateUtpStateEntryNortel-Magellan-Passport-UtpDpnTrunksMIB
1.3.6.1.4.1.562.2.4.1.61.2.11.1.6dpnGateUtpControlStatusNortel-Magellan-Passport-UtpDpnTrunksMIB