Nortel-Magellan-Passport-SourceRouteEndStationMIB :: vrSresRouteDescriptorLength

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-SourceRouteEndStationMIB › vrSresRouteDescriptorLength

vrSresRouteDescriptorLength

Module: Nortel-Magellan-Passport-SourceRouteEndStationMIB

OID (symbolic): Nortel-Magellan-Passport-SourceRouteEndStationMIB::vrSresRouteDescriptorLength

OID (numeric): 1.3.6.1.4.1.562.2.4.1.100.13.11.1.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: This attribute indicates the maximum number of route descriptors supported by this implementation. The maximum number of hops will be one less because one route descriptor is always required for the destination. This attribute affects the amount of memory used by the route entry table. The larger this attribute is, the more memory the route entry table will use.

What is vrSresRouteDescriptorLength?

The maximum number of route descriptors (ring/bridge hop segments) this implementation supports in a source route, defaulting to 14; the usable hop count is one less since a descriptor is always needed for the destination. An admin increases this only if the network's source-route paths span more Token Ring/bridge hops than the current setting allows, understanding it increases route-table memory use.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.100.13.11.1.3
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-SourceRouteEndStationMIB::vrSresRouteDescriptorLength

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.100.13.11.1.3.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-SourceRouteEndStationMIB::vrSresRouteDescriptorLength.1

Start monitoring Nortel Magellan Passport WAN switch with token-ring interfaces (source-route bridging) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-SourceRouteEndStationMIB::vrSresRouteDescriptorLength OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport WAN switch with token-ring interfaces (source-route bridging) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.100vrNortel-Magellan-Passport-VirtualRouterMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.100.13vrSresNortel-Magellan-Passport-SourceRouteEndStationMIB
1.3.6.1.4.1.562.2.4.1.100.13.11vrSresProvTableNortel-Magellan-Passport-SourceRouteEndStationMIB
1.3.6.1.4.1.562.2.4.1.100.13.11.1vrSresProvEntryNortel-Magellan-Passport-SourceRouteEndStationMIB
1.3.6.1.4.1.562.2.4.1.100.13.11.1.3vrSresRouteDescriptorLengthNortel-Magellan-Passport-SourceRouteEndStationMIB