Nortel-Magellan-Passport-ServerAccessRsaMIB :: rsaDnaCugType

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-ServerAccessRsaMIB › rsaDnaCugType

rsaDnaCugType

Module: Nortel-Magellan-Passport-ServerAccessRsaMIB

OID (symbolic): Nortel-Magellan-Passport-ServerAccessRsaMIB::rsaDnaCugType

OID (numeric): 1.3.6.1.4.1.562.2.4.1.108.2.2.10.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies the Cug type - the Cug is either a national Cug, or an international Cug. International closed user groups are usually established between DTEs for which there is an X.75 Gateway between; whereas national closed user groups are usually established between DTEs for which there is no X.75 Gateway between. (National Cugs cannot normally traverse an X.75 Gateway). If this attribute is set to national, then the Cug is a national Cug, in which case, the dnic should be left at its default value since it is not part of a national Cug. If this attribute is set to international, then the Cug is an international Cug, in which case, the dnic should be set appropriately as part of the Cug interlockCode.

What is rsaDnaCugType?

Marks whether this closed user group is national(0, default) or international(1); international CUGs traverse an X.75 gateway and require a dnic value, while national CUGs normally leave dnic at default.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.108.2.2.10.1.1
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-ServerAccessRsaMIB::rsaDnaCugType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.108.2.2.10.1.1.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-ServerAccessRsaMIB::rsaDnaCugType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.108.2.2.10.1.1.1 i <value>

Start monitoring Nortel Magellan Passport WAN switch (RSA-based server access security) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-ServerAccessRsaMIB::rsaDnaCugType OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport WAN switch (RSA-based server access security) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.108rsaNortel-Magellan-Passport-ServerAccessRsaMIB
1.3.6.1.4.1.562.2.4.1.108.2rsaDnaNortel-Magellan-Passport-ServerAccessRsaMIB
1.3.6.1.4.1.562.2.4.1.108.2.2rsaDnaCugNortel-Magellan-Passport-ServerAccessRsaMIB
1.3.6.1.4.1.562.2.4.1.108.2.2.10rsaDnaCugCugOptionsTableNortel-Magellan-Passport-ServerAccessRsaMIB
1.3.6.1.4.1.562.2.4.1.108.2.2.10.1rsaDnaCugCugOptionsEntryNortel-Magellan-Passport-ServerAccessRsaMIB
1.3.6.1.4.1.562.2.4.1.108.2.2.10.1.1rsaDnaCugTypeNortel-Magellan-Passport-ServerAccessRsaMIB