All MIBs › Nortel-Magellan-Passport-LaneClientMIB › lecConfigurationSource
lecConfigurationSource
Module: Nortel-Magellan-Passport-LaneClientMIB
OID (symbolic): Nortel-Magellan-Passport-LaneClientMIB::lecConfigurationSource
OID (numeric): 1.3.6.1.4.1.562.2.4.1.124.17.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This attribute indicates whether this LEC used the LECS, and if so, the method used to establish the Configuration Direct VCC. The attribute retains this value when the LEC is reset. - usedProvisionedLecsAddress: The ATM address specified in lecsAddress was used to locate the LECS. - gotLecsAddressViaIlmi: The ATM address of the LECS was located via the ILMI protocol. - usedWellKnownLecsAddress: The well-known ATM address 0x47007900000000000000000000-00A03E000001-00 was used to locate the LECS. - usedLecsPvc: The well known PVC of VPI=0, VCI=17 was used to locate the LECS. - didNotUseLecs: The LECS was bypassed and the ATM address specified in lesAddress was used to locate the LES.
What is lecConfigurationSource?
This read-only INTEGER reports how this LEC located its LECS/LES and established the Configuration Direct VCC: usedProvisionedLecsAddress(1), gotLecsAddressViaIlmi(2), usedWellKnownLecsAddress(3), usedLecsPvc(4), or didNotUseLecs(5); the value is retained across a LEC reset. An admin reads it when troubleshooting LEC setup to see exactly which discovery method was used.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.124.17.1.6 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-LaneClientMIB::lecConfigurationSource
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.124.17.1.6.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-LaneClientMIB::lecConfigurationSource.1
Start monitoring Nortel Magellan Passport ATM switch (LAN Emulation client) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-LaneClientMIB::lecConfigurationSource OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM switch (LAN Emulation client) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.124 | lec | Nortel-Magellan-Passport-LaneClientMIB |
| 1.3.6.1.4.1.562.2.4.1.124.17 | lecOperTable | Nortel-Magellan-Passport-LaneClientMIB |
| 1.3.6.1.4.1.562.2.4.1.124.17.1 | lecOperEntry | Nortel-Magellan-Passport-LaneClientMIB |
| 1.3.6.1.4.1.562.2.4.1.124.17.1.6 | lecConfigurationSource | Nortel-Magellan-Passport-LaneClientMIB |