All MIBs › Nortel-Magellan-Passport-DprsMcsEpMIB › mcsMgrDprsMcsEpGEpLCoPathFailureAction
mcsMgrDprsMcsEpGEpLCoPathFailureAction
Module: Nortel-Magellan-Passport-DprsMcsEpMIB
OID (symbolic): Nortel-Magellan-Passport-DprsMcsEpMIB::mcsMgrDprsMcsEpGEpLCoPathFailureAction
OID (numeric): 1.3.6.1.4.1.562.2.4.1.122.2.3.4.10.1.22
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This attribute displays whether the application is set to tolerate momentary interruption of a path while a new path is selected. If disconnectConnection is displayed, the application is informed as soon as possible about a failure by disconnection. If the attribute displays reRoutePath, the path may attempt an immediate reroute, provided the failure is a recoverable failure. If rerouting fails the application is informed of the failure. With this option set to reRoutePath the LCo may wait up to 30 seconds before informing the service of complete disconnection in order to allow both ends to attempt to reconnect. Note that if PLC components are different at both ends only the calling end is allowed to reconnect.
All pathTypes respect this attribute. Also on a manualPath with both ends provisioned with independent paths (at least with respect to the failure) this option will have the desired effect that the path is rerouted without complete disconnection at both ends
What is mcsMgrDprsMcsEpGEpLCoPathFailureAction?
Controls how the connection handles a recoverable path failure: disconnectConnection notifies the application immediately, while reRoutePath lets the LCo try an immediate reroute, waiting up to 30 seconds, before declaring failure. Trades a short service blip for avoiding a full disconnect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.122.2.3.4.10.1.22 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-DprsMcsEpMIB::mcsMgrDprsMcsEpGEpLCoPathFailureAction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.122.2.3.4.10.1.22.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-DprsMcsEpMIB::mcsMgrDprsMcsEpGEpLCoPathFailureAction.1
Start monitoring Nortel Magellan Passport multiservice switch (DPRS MCS endpoint groups) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-DprsMcsEpMIB::mcsMgrDprsMcsEpGEpLCoPathFailureAction OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice switch (DPRS MCS endpoint groups) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1.122 | mcsMgr | Nortel-Magellan-Passport-McsMgrMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.122.2 | mcsMgrDprsMcsEpG | Nortel-Magellan-Passport-DprsMcsEpMIB |
| 1.3.6.1.4.1.562.2.4.1.122.2.3 | mcsMgrDprsMcsEpGEp | Nortel-Magellan-Passport-DprsMcsEpMIB |
| 1.3.6.1.4.1.562.2.4.1.122.2.3.4 | mcsMgrDprsMcsEpGEpLCo | Nortel-Magellan-Passport-DprsMcsEpMIB |
| 1.3.6.1.4.1.562.2.4.1.122.2.3.4.10 | mcsMgrDprsMcsEpGEpLCoPathDataTable | Nortel-Magellan-Passport-DprsMcsEpMIB |
| 1.3.6.1.4.1.562.2.4.1.122.2.3.4.10.1 | mcsMgrDprsMcsEpGEpLCoPathDataEntry | Nortel-Magellan-Passport-DprsMcsEpMIB |
| 1.3.6.1.4.1.562.2.4.1.122.2.3.4.10.1.22 | mcsMgrDprsMcsEpGEpLCoPathFailureAction | Nortel-Magellan-Passport-DprsMcsEpMIB |