Nortel-Magellan-Passport-DprsMcsEpMIB :: mcsMgrDprsMcsEpGEpEpDBandwidth

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNortel-Magellan-Passport-DprsMcsEpMIBmcsMgrDprsMcsEpGEpEpDBandwidth

mcsMgrDprsMcsEpGEpEpDBandwidth

Module: Nortel-Magellan-Passport-DprsMcsEpMIB

OID (symbolic): Nortel-Magellan-Passport-DprsMcsEpMIB::mcsMgrDprsMcsEpGEpEpDBandwidth

OID (numeric): 1.3.6.1.4.1.562.2.4.1.122.2.3.2.10.1.1

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the bandwidth at which the transport connection agrees to transfer information. A conservative value would be the sum of the committed information rates (CIRs) of all individual Frame Relay DLCIs multiplexed on the transport connection. For ATM connections, the value is converted to an equivalent Peak Cell Rate (PCR01) for all cells with Cell Loss Priority (CLP), CLP = 0 and CLP = 1. Note that the conversion to an equivalent cell rate for ATM connections may result in some wasted bandwidth depending on the average frame size to cell ratio.

What is mcsMgrDprsMcsEpGEpEpDBandwidth?

Sets the bandwidth this endpoint's transport connection should reserve when established, typically the sum of the committed information rates of all Frame Relay DLCIs it carries, or an equivalent ATM peak cell rate. The factory default is 512 kbps, and admins raise it to match actual aggregated traffic needs.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.122.2.3.2.10.1.1
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-DprsMcsEpMIB::mcsMgrDprsMcsEpGEpEpDBandwidth

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.122.2.3.2.10.1.1.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-DprsMcsEpMIB::mcsMgrDprsMcsEpGEpEpDBandwidth.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.122.2.3.2.10.1.1.1 i <value>

Start monitoring Nortel Magellan Passport multiservice switch (DPRS MCS endpoint groups) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-DprsMcsEpMIB::mcsMgrDprsMcsEpGEpEpDBandwidth OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice switch (DPRS MCS endpoint groups) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.122mcsMgrNortel-Magellan-Passport-McsMgrMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.122.2mcsMgrDprsMcsEpGNortel-Magellan-Passport-DprsMcsEpMIB
1.3.6.1.4.1.562.2.4.1.122.2.3mcsMgrDprsMcsEpGEpNortel-Magellan-Passport-DprsMcsEpMIB
1.3.6.1.4.1.562.2.4.1.122.2.3.2mcsMgrDprsMcsEpGEpEpDNortel-Magellan-Passport-DprsMcsEpMIB
1.3.6.1.4.1.562.2.4.1.122.2.3.2.10mcsMgrDprsMcsEpGEpEpDProvTableNortel-Magellan-Passport-DprsMcsEpMIB
1.3.6.1.4.1.562.2.4.1.122.2.3.2.10.1mcsMgrDprsMcsEpGEpEpDProvEntryNortel-Magellan-Passport-DprsMcsEpMIB
1.3.6.1.4.1.562.2.4.1.122.2.3.2.10.1.1mcsMgrDprsMcsEpGEpEpDBandwidthNortel-Magellan-Passport-DprsMcsEpMIB