Nortel-Magellan-Passport-DpnTrunksMIB :: dpnGateAlarmStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-DpnTrunksMIB › dpnGateAlarmStatus

dpnGateAlarmStatus

Module: Nortel-Magellan-Passport-DpnTrunksMIB

OID (symbolic): Nortel-Magellan-Passport-DpnTrunksMIB::dpnGateAlarmStatus

OID (numeric): 1.3.6.1.4.1.562.2.4.1.61.103.1.7

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user.

When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present.

The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled.

The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled.

The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled.

The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled.

The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component.

Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)

What is dpnGateAlarmStatus?

A 1-byte OSI alarm-status bitmask summarizing outstanding alarms on the gateway by severity (underRepair, critical, major, minor, alarmOutstanding), the quickest field to check for an at-a-glance health flag.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.61.103.1.7
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-DpnTrunksMIB::dpnGateAlarmStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.61.103.1.7.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-DpnTrunksMIB::dpnGateAlarmStatus.1

Start monitoring Nortel Magellan Passport DPN packet switch (trunk interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-DpnTrunksMIB::dpnGateAlarmStatus OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport DPN packet switch (trunk interfaces) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.61dpnGateNortel-Magellan-Passport-DpnTrunksMIB
1.3.6.1.4.1.562.2.4.1.61.103dpnGateStateTableNortel-Magellan-Passport-DpnTrunksMIB
1.3.6.1.4.1.562.2.4.1.61.103.1dpnGateStateEntryNortel-Magellan-Passport-DpnTrunksMIB
1.3.6.1.4.1.562.2.4.1.61.103.1.7dpnGateAlarmStatusNortel-Magellan-Passport-DpnTrunksMIB