All MIBs › Nortel-Magellan-Passport-DcmeMIB › dcmeProfileSetupPriority
dcmeProfileSetupPriority
Module: Nortel-Magellan-Passport-DcmeMIB
OID (symbolic): Nortel-Magellan-Passport-DcmeMIB::dcmeProfileSetupPriority
OID (numeric): 1.3.6.1.4.1.562.2.4.1.129.2.10.1.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute specifies the priority at which a path is established. Zero is the highest priority and four is the lowest. When PORS establishes a path through the network, it uses the setupPriority attribute to determine its potential for bumping established paths to acquire their bandwidth. The holdingPriority, a complementary attribute of this attribute, indicates the priority a path maintains once it is established. A new path can bump an existing path if the new path's setupPriority is higher (numerically less) than the existing path's holdingPriority.
What is dcmeProfileSetupPriority?
Specifies, from 0 (highest) to 4 (lowest), the priority PORS (the Passport route selector) uses when initially establishing a path for connections using this profile, determining its ability to bump lower-priority established paths to acquire bandwidth. Admins raise this for profiles carrying critical traffic that must be able to preempt less important calls when bandwidth is scarce, working together with dcmeProfileHoldingPriority.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.129.2.10.1.1 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-DcmeMIB::dcmeProfileSetupPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.129.2.10.1.1.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-DcmeMIB::dcmeProfileSetupPriority.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.129.2.10.1.1.1 i <value>
Start monitoring Nortel Magellan Passport / Passport DPN multiservice switch (DCME voice compression) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-DcmeMIB::dcmeProfileSetupPriority OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport / Passport DPN multiservice switch (DCME voice compression) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.129 | dcme | Nortel-Magellan-Passport-DcmeMIB |
| 1.3.6.1.4.1.562.2.4.1.129.2 | dcmeProfile | Nortel-Magellan-Passport-DcmeMIB |
| 1.3.6.1.4.1.562.2.4.1.129.2.10 | dcmeProfileLCOpsTable | Nortel-Magellan-Passport-DcmeMIB |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1 | dcmeProfileLCOpsEntry | Nortel-Magellan-Passport-DcmeMIB |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.1 | dcmeProfileSetupPriority | Nortel-Magellan-Passport-DcmeMIB |