Nortel-Magellan-Passport-DcmeMIB :: dcmeProfileRequiredTrafficType

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-DcmeMIB › dcmeProfileRequiredTrafficType

dcmeProfileRequiredTrafficType

Module: Nortel-Magellan-Passport-DcmeMIB

OID (symbolic): Nortel-Magellan-Passport-DcmeMIB::dcmeProfileRequiredTrafficType

OID (numeric): 1.3.6.1.4.1.562.2.4.1.129.2.10.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies the type of traffic transmitted over the path. There are eight possible traffic types, and the path can transmit only one of them. The originating end of the connection determines the type. The voice, data and video traffic types are defined, and five other arbitrary traffic types can be defined by the network administration. This attribute is used in the route selection process to restrict the route to trunks that support this traffic type. The supportedTrafficType trunk attribute lists all the types of traffic allowed on the trunk. For example, if requiredTrafficType is specified as trafficType1, then only trunks that include trafficType1 in supportedTrafficType will be candidates for this connection.

What is dcmeProfileRequiredTrafficType?

Specifies which of eight possible traffic types (voice(0), data(1), video(2), or five network-administrator-defined types) a path using this profile carries, used by PORS to restrict routing to trunks that advertise support for that traffic type via their supportedTrafficType attribute. Admins set this per profile to keep, for example, video traffic off trunks not provisioned to carry it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.129.2.10.1.4
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-DcmeMIB::dcmeProfileRequiredTrafficType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.129.2.10.1.4.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-DcmeMIB::dcmeProfileRequiredTrafficType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.129.2.10.1.4.1 i <value>

Start monitoring Nortel Magellan Passport / Passport DPN multiservice switch (DCME voice compression) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-DcmeMIB::dcmeProfileRequiredTrafficType OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport / Passport DPN multiservice switch (DCME voice compression) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.129dcmeNortel-Magellan-Passport-DcmeMIB
1.3.6.1.4.1.562.2.4.1.129.2dcmeProfileNortel-Magellan-Passport-DcmeMIB
1.3.6.1.4.1.562.2.4.1.129.2.10dcmeProfileLCOpsTableNortel-Magellan-Passport-DcmeMIB
1.3.6.1.4.1.562.2.4.1.129.2.10.1dcmeProfileLCOpsEntryNortel-Magellan-Passport-DcmeMIB
1.3.6.1.4.1.562.2.4.1.129.2.10.1.4dcmeProfileRequiredTrafficTypeNortel-Magellan-Passport-DcmeMIB