All MIBs › Nortel-Magellan-Passport-DcmeMIB › dcmeProfileRequiredCustomerParm
dcmeProfileRequiredCustomerParm
Module: Nortel-Magellan-Passport-DcmeMIB
OID (symbolic): Nortel-Magellan-Passport-DcmeMIB::dcmeProfileRequiredCustomerParm
OID (numeric): 1.3.6.1.4.1.562.2.4.1.129.2.10.1.7
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute specifies the allowed customer defined parameter of the trunks on the route. The value of requiredCustomerParm ranges from 0 to 7. The meaning of each value is specific to a particular network, thus allowing them to customize the use of their trunks. A complementary trunk attribute, customerParameter, also has a value from zero to seven. The route selection process does not consider trunks whose customerParameter is greater than the requiredCustomerParameter of the path.
What is dcmeProfileRequiredCustomerParm?
Specifies an allowed customer-defined parameter value, 0 to 7, whose meaning is defined per network by the operator; PORS excludes any trunk whose own customerParameter attribute is numerically greater than this value from routes under this profile. Admins use this network-specific tagging scheme to segregate routing for different customer traffic classes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.129.2.10.1.7 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-DcmeMIB::dcmeProfileRequiredCustomerParm
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.129.2.10.1.7.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-DcmeMIB::dcmeProfileRequiredCustomerParm.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.129.2.10.1.7.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> dcmeProfileRequiredCustomerParm.1
Start monitoring Nortel Magellan Passport / Passport DPN multiservice switch (DCME voice compression) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-DcmeMIB::dcmeProfileRequiredCustomerParm OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport / Passport DPN multiservice switch (DCME voice compression) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.129 | dcme | Nortel-Magellan-Passport-DcmeMIB |
| 1.3.6.1.4.1.562.2.4.1.129.2 | dcmeProfile | Nortel-Magellan-Passport-DcmeMIB |
| 1.3.6.1.4.1.562.2.4.1.129.2.10 | dcmeProfileLCOpsTable | Nortel-Magellan-Passport-DcmeMIB |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1 | dcmeProfileLCOpsEntry | Nortel-Magellan-Passport-DcmeMIB |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.7 | dcmeProfileRequiredCustomerParm | Nortel-Magellan-Passport-DcmeMIB |