All MIBs › Nortel-Magellan-Passport-DcmeMIB › dcmeProfileInsertedOutputDelay
dcmeProfileInsertedOutputDelay
Module: Nortel-Magellan-Passport-DcmeMIB
OID (symbolic): Nortel-Magellan-Passport-DcmeMIB::dcmeProfileInsertedOutputDelay
OID (numeric): 1.3.6.1.4.1.562.2.4.1.129.2.11.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies the amount of added output delay used to compensate for cross network delay variations. It applies to voice, modem and fax traffic. It is required to add output delay so that the statistical variation in the transit time of cells crossing the network does not cause gaps in speech. Backbone networks where high priority traffic consumes a high percentage of trunk bandwidth will require a higher insertedOutputDelay to compensate for the greater cell delay variation (CDV).
What is dcmeProfileInsertedOutputDelay?
Specifies, in milliseconds from a fixed set of values (5 through 150), extra output delay added under this profile to compensate for cell delay variation across the network, applying to voice, modem, and fax traffic. Admins increase this on backbone networks where high-priority traffic consumes a large share of trunk bandwidth and causes greater delay variation, to prevent gaps in reconstructed speech.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.129.2.11.1.13 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-DcmeMIB::dcmeProfileInsertedOutputDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.129.2.11.1.13.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-DcmeMIB::dcmeProfileInsertedOutputDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.129.2.11.1.13.1 i <value>
Start monitoring Nortel Magellan Passport / Passport DPN multiservice switch (DCME voice compression) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-DcmeMIB::dcmeProfileInsertedOutputDelay OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport / Passport DPN multiservice switch (DCME voice compression) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.129 | dcme | Nortel-Magellan-Passport-DcmeMIB |
| 1.3.6.1.4.1.562.2.4.1.129.2 | dcmeProfile | Nortel-Magellan-Passport-DcmeMIB |
| 1.3.6.1.4.1.562.2.4.1.129.2.11 | dcmeProfileFrOpsTable | Nortel-Magellan-Passport-DcmeMIB |
| 1.3.6.1.4.1.562.2.4.1.129.2.11.1 | dcmeProfileFrOpsEntry | Nortel-Magellan-Passport-DcmeMIB |
| 1.3.6.1.4.1.562.2.4.1.129.2.11.1.13 | dcmeProfileInsertedOutputDelay | Nortel-Magellan-Passport-DcmeMIB |