All MIBs › Nortel-Magellan-Passport-DcmeMIB › dcmeProfileHoldingPriority
dcmeProfileHoldingPriority
Module: Nortel-Magellan-Passport-DcmeMIB
OID (symbolic): Nortel-Magellan-Passport-DcmeMIB::dcmeProfileHoldingPriority
OID (numeric): 1.3.6.1.4.1.562.2.4.1.129.2.10.1.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute specifies the priority that a path holds once it is established. Zero is the highest priority and four is the lowest. A path's holdingPriority determines its likelihood of being bumped by a new path to acquire its bandwidth. The setupPriority, a complementary attribute, indicates the priority of a path at establishment time. A new path can bump an existing path if the new path's setupPriority is higher (numerically less) than the existing path's holdingPriority.
What is dcmeProfileHoldingPriority?
Specifies, from 0 (highest) to 4 (lowest), the priority a path established under this profile retains once it is up, determining how vulnerable it is to being bumped by a new higher-setup-priority path needing the same bandwidth. Admins raise this for profiles whose calls should stay up even under network congestion, complementing dcmeProfileSetupPriority which governs initial establishment.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.129.2.10.1.2 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-DcmeMIB::dcmeProfileHoldingPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.129.2.10.1.2.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-DcmeMIB::dcmeProfileHoldingPriority.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.129.2.10.1.2.1 i <value>
Start monitoring Nortel Magellan Passport / Passport DPN multiservice switch (DCME voice compression) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-DcmeMIB::dcmeProfileHoldingPriority OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport / Passport DPN multiservice switch (DCME voice compression) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.129 | dcme | Nortel-Magellan-Passport-DcmeMIB |
| 1.3.6.1.4.1.562.2.4.1.129.2 | dcmeProfile | Nortel-Magellan-Passport-DcmeMIB |
| 1.3.6.1.4.1.562.2.4.1.129.2.10 | dcmeProfileLCOpsTable | Nortel-Magellan-Passport-DcmeMIB |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1 | dcmeProfileLCOpsEntry | Nortel-Magellan-Passport-DcmeMIB |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.2 | dcmeProfileHoldingPriority | Nortel-Magellan-Passport-DcmeMIB |