Nortel-Magellan-Passport-DcmeMIB :: dcmeProfileEgressAudioGain

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-DcmeMIB › dcmeProfileEgressAudioGain

dcmeProfileEgressAudioGain

Module: Nortel-Magellan-Passport-DcmeMIB

OID (symbolic): Nortel-Magellan-Passport-DcmeMIB::dcmeProfileEgressAudioGain

OID (numeric): 1.3.6.1.4.1.562.2.4.1.129.2.11.1.15

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies the gain in dB that is applied to data leaving the network on this route. It applies to voice, modem and fax traffic. For example, egress gain is applied to audio data going to a PBX. If egressAudioGain is negative, a loss is applied.

ingressAudioGain and egressAudioGain are used in loss planning, which is the configuration of the devices in the network to ensure that the signal level from any point in the network to any other point is correct.

What is dcmeProfileEgressAudioGain?

Specifies the gain, -12 to 12 dB, applied under this profile to audio leaving the network toward external equipment (e.g., a PBX), with negative values applying a loss; it's used together with dcmeProfileIngressAudioGain for loss planning. Admins adjust this when audio delivered out of the network is consistently too loud or too quiet at the far end.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.129.2.11.1.15
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-DcmeMIB::dcmeProfileEgressAudioGain

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.129.2.11.1.15.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-DcmeMIB::dcmeProfileEgressAudioGain.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.129.2.11.1.15.1 i <value>

Start monitoring Nortel Magellan Passport / Passport DPN multiservice switch (DCME voice compression) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-DcmeMIB::dcmeProfileEgressAudioGain OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport / Passport DPN multiservice switch (DCME voice compression) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.129dcmeNortel-Magellan-Passport-DcmeMIB
1.3.6.1.4.1.562.2.4.1.129.2dcmeProfileNortel-Magellan-Passport-DcmeMIB
1.3.6.1.4.1.562.2.4.1.129.2.11dcmeProfileFrOpsTableNortel-Magellan-Passport-DcmeMIB
1.3.6.1.4.1.562.2.4.1.129.2.11.1dcmeProfileFrOpsEntryNortel-Magellan-Passport-DcmeMIB
1.3.6.1.4.1.562.2.4.1.129.2.11.1.15dcmeProfileEgressAudioGainNortel-Magellan-Passport-DcmeMIB