Nortel-Magellan-Passport-DcmeMIB :: dcmeProfileDtmfRegeneration

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-DcmeMIB › dcmeProfileDtmfRegeneration

dcmeProfileDtmfRegeneration

Module: Nortel-Magellan-Passport-DcmeMIB

OID (symbolic): Nortel-Magellan-Passport-DcmeMIB::dcmeProfileDtmfRegeneration

OID (numeric): 1.3.6.1.4.1.562.2.4.1.129.2.11.1.20

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies the DTMF regeneration parameter used during negotiation with the remote end across the subnet.

If dtmfRegeneration is on, it is desired that DTMF tones received from the link are first converted to digits before being sent to the subnet. When a digit is received from the subnet, its respective DTMF tone is desired to be generated before being sent to the link.

If dtmfRegeneration is off, it is desired that DTMF tones are transported transparently as audio.

What is dcmeProfileDtmfRegeneration?

Specifies the DTMF handling negotiated with the remote end under this profile: on(1) converts received DTMF tones to digits before sending across the subnet and regenerates the tone at the far end, while off(0) transports DTMF tones transparently as audio. Admins enable DTMF regeneration on profiles where compression could otherwise distort the tones enough to be misread by downstream equipment.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.129.2.11.1.20
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-DcmeMIB::dcmeProfileDtmfRegeneration

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.129.2.11.1.20.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-DcmeMIB::dcmeProfileDtmfRegeneration.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.129.2.11.1.20.1 i <value>

Start monitoring Nortel Magellan Passport / Passport DPN multiservice switch (DCME voice compression) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-DcmeMIB::dcmeProfileDtmfRegeneration OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport / Passport DPN multiservice switch (DCME voice compression) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.129dcmeNortel-Magellan-Passport-DcmeMIB
1.3.6.1.4.1.562.2.4.1.129.2dcmeProfileNortel-Magellan-Passport-DcmeMIB
1.3.6.1.4.1.562.2.4.1.129.2.11dcmeProfileFrOpsTableNortel-Magellan-Passport-DcmeMIB
1.3.6.1.4.1.562.2.4.1.129.2.11.1dcmeProfileFrOpsEntryNortel-Magellan-Passport-DcmeMIB
1.3.6.1.4.1.562.2.4.1.129.2.11.1.20dcmeProfileDtmfRegenerationNortel-Magellan-Passport-DcmeMIB