Nortel-Magellan-Passport-DcmeMIB :: dclVsLCoRequiredCustomerParameter

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-DcmeMIB › dclVsLCoRequiredCustomerParameter

dclVsLCoRequiredCustomerParameter

Module: Nortel-Magellan-Passport-DcmeMIB

OID (symbolic): Nortel-Magellan-Passport-DcmeMIB::dclVsLCoRequiredCustomerParameter

OID (numeric): 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.14

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: This attribute indicates the allowed customer defined parameter of the trunks on the route.The originating end of the connection determines the customer defined parameter. Its value, a number from zero to seven, is chosen by a network administration to have a meaning specific to their network, thus allowing them to customize the use of their trunks. A complementary trunk attribute, customerParameter, also has a value from zero to seven. The route selection process does not consider trunks whose customerParameter is greater than the requiredCustomerParameter of the path.

What is dclVsLCoRequiredCustomerParameter?

Reports the allowed customer-defined parameter, 0 to 7, that this path's originating end set as a routing constraint, mirroring the profile's dcmeProfileRequiredCustomerParm. Admins use this network-specific value to verify the live connection routed under the correct customer-traffic classification.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.14
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-DcmeMIB::dclVsLCoRequiredCustomerParameter

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.14.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-DcmeMIB::dclVsLCoRequiredCustomerParameter.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> dclVsLCoRequiredCustomerParameter.1

Start monitoring Nortel Magellan Passport / Passport DPN multiservice switch (DCME voice compression) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-DcmeMIB::dclVsLCoRequiredCustomerParameter OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport / Passport DPN multiservice switch (DCME voice compression) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.130dclNortel-Magellan-Passport-DcmeMIB
1.3.6.1.4.1.562.2.4.1.130.4dclVsNortel-Magellan-Passport-DcmeMIB
1.3.6.1.4.1.562.2.4.1.130.4.3dclVsLCoNortel-Magellan-Passport-DcmeMIB
1.3.6.1.4.1.562.2.4.1.130.4.3.10dclVsLCoPathDataTableNortel-Magellan-Passport-DcmeMIB
1.3.6.1.4.1.562.2.4.1.130.4.3.10.1dclVsLCoPathDataEntryNortel-Magellan-Passport-DcmeMIB
1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.14dclVsLCoRequiredCustomerParameterNortel-Magellan-Passport-DcmeMIB