All MIBs › Nortel-Magellan-Passport-DataCollectionMIB › colSpStandbyStatus
colSpStandbyStatus
Module: Nortel-Magellan-Passport-DataCollectionMIB
OID (symbolic): Nortel-Magellan-Passport-DataCollectionMIB::colSpStandbyStatus
OID (numeric): 1.3.6.1.4.1.562.2.4.1.21.2.11.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: If supported by the component, this attribute indicates the OSI Standby status of the component.
The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable.
The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity.
The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
What is colSpStandbyStatus?
OSI standby status of the Spooler when it acts as a backup resource: hotStandby (ready to take over instantly), coldStandby (needs initialization first), providingService (currently backing up another resource), or notSet if not applicable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.21.2.11.1.8 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-DataCollectionMIB::colSpStandbyStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.21.2.11.1.8.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-DataCollectionMIB::colSpStandbyStatus.1
Start monitoring Nortel Magellan Passport multiservice switch (performance data collection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-DataCollectionMIB::colSpStandbyStatus OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice switch (performance data collection) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.21 | col | Nortel-Magellan-Passport-DataCollectionMIB |
| 1.3.6.1.4.1.562.2.4.1.21.2 | colSp | Nortel-Magellan-Passport-DataCollectionMIB |
| 1.3.6.1.4.1.562.2.4.1.21.2.11 | colSpStateTable | Nortel-Magellan-Passport-DataCollectionMIB |
| 1.3.6.1.4.1.562.2.4.1.21.2.11.1 | colSpStateEntry | Nortel-Magellan-Passport-DataCollectionMIB |
| 1.3.6.1.4.1.562.2.4.1.21.2.11.1.8 | colSpStandbyStatus | Nortel-Magellan-Passport-DataCollectionMIB |