All MIBs › Nortel-Magellan-Passport-CircuitEmulationServiceMIB › aal1CesPartialFill
aal1CesPartialFill
Module: Nortel-Magellan-Passport-CircuitEmulationServiceMIB
OID (symbolic): Nortel-Magellan-Passport-CircuitEmulationServiceMIB::aal1CesPartialFill
OID (numeric): 1.3.6.1.4.1.562.2.4.1.119.11.1.6
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: A significant source of delay in a structured service is the amount of time it takes to collect enough data to fill a cell. This period of time can be reduced by sending cells that are only partially filled with data (idlePattern octets are added to the ATM payload beyond the partial fill level).
This attribute defines the number of payload octets to fill with data. It is applicable to structured services only, and must be set to 47 for unstructured services.
On a given AAL1 Function Processor, the maximum cell rate that can be sustained is dependent upon the combined bandwidths of the provisioned services, and (for structured services) the levels of partialFill. The smaller the partialFill level, the greater the cell rate and hence the fewer the services that can be sustained at that fill level.
What is aal1CesPartialFill?
The number of payload octets to fill per cell before sending, applicable to structured services only (must be 47, fully filled, for unstructured services); a smaller value reduces delay but increases the cell rate needed to carry the same data, limiting how many services a card can sustain. Defaults to 47.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.119.11.1.6 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-CircuitEmulationServiceMIB::aal1CesPartialFill
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.119.11.1.6.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-CircuitEmulationServiceMIB::aal1CesPartialFill.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.119.11.1.6.1 i <value>
Start monitoring Nortel Magellan Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-CircuitEmulationServiceMIB::aal1CesPartialFill OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport switches from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.119 | aal1Ces | Nortel-Magellan-Passport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.2.4.1.119.11 | aal1CesProvTable | Nortel-Magellan-Passport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.2.4.1.119.11.1 | aal1CesProvEntry | Nortel-Magellan-Passport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.2.4.1.119.11.1.6 | aal1CesPartialFill | Nortel-Magellan-Passport-CircuitEmulationServiceMIB |