All MIBs › Nortel-Magellan-Passport-CircuitEmulationServiceMIB › aal1CesLCoOverrideRemoteName
aal1CesLCoOverrideRemoteName
Module: Nortel-Magellan-Passport-CircuitEmulationServiceMIB
OID (symbolic): Nortel-Magellan-Passport-CircuitEmulationServiceMIB::aal1CesLCoOverrideRemoteName
OID (numeric): 1.3.6.1.4.1.562.2.4.1.119.5.10.1.2
Node type: OBJECT-TYPE
Type: AsciiString
Access: read-write
Description: If set and the current PLC remoteName is blank this remoteName will override the blank PLC remoteName. Usually you would set this attribute and then lock/unlock the service component which will result in this new overrideRemoteName being used as if it had been provisioned into the PLC remoteName. The advantage of this attribute is that the connection's remoteName can be changed immediately without having to 'activate prov' but the disadvantage is that the overrideRemoteName is not permanent and if the card or switch is reset the override will be lost.
What is aal1CesLCoOverrideRemoteName?
A temporary remote-name override applied when the underlying PLC's remoteName is blank; after setting it, an operator locks/unlocks the service so it takes effect, but the override does not survive a card or switch reset, unlike a permanent provisioning change.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.119.5.10.1.2 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-CircuitEmulationServiceMIB::aal1CesLCoOverrideRemoteName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.119.5.10.1.2.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-CircuitEmulationServiceMIB::aal1CesLCoOverrideRemoteName.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.119.5.10.1.2.1 s <value>
Start monitoring Nortel Magellan Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-CircuitEmulationServiceMIB::aal1CesLCoOverrideRemoteName OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport switches from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.119 | aal1Ces | Nortel-Magellan-Passport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.2.4.1.119.5 | aal1CesLCo | Nortel-Magellan-Passport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.2.4.1.119.5.10 | aal1CesLCoPathDataTable | Nortel-Magellan-Passport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1 | aal1CesLCoPathDataEntry | Nortel-Magellan-Passport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.2 | aal1CesLCoOverrideRemoteName | Nortel-Magellan-Passport-CircuitEmulationServiceMIB |