All MIBs › Nortel-Magellan-Passport-CircuitEmulationServiceMIB › aal1CesIdleSuppression
aal1CesIdleSuppression
Module: Nortel-Magellan-Passport-CircuitEmulationServiceMIB
OID (symbolic): Nortel-Magellan-Passport-CircuitEmulationServiceMIB::aal1CesIdleSuppression
OID (numeric): 1.3.6.1.4.1.562.2.4.1.119.11.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute controls the suppression of idle cells. An idle cell is one in which the bytes of the ATM payload (up to the partialFill level) match the idlePattern.
If idleSuppression is off, idle cells are not suppressed.
If idleSuppression is on, at least 75% of cells are suppressed under idle conditions.
The strategy is as follows: the first idle cell after a sequence of non-idle cells is always sent; those that follow are suppressed. Note, however, that at least one cell in eight is always sent (to allow the receive end to regenerate the suppressed cells) and more often than not, two cells are sent (the cell containing the AAL1 pointer, which will almost always fail to match, and the one after that).
What is aal1CesIdleSuppression?
Controls whether idle cells (matching aal1CesIdlePattern) are suppressed to save bandwidth: off(0) sends every cell, while on(1) suppresses at least 75% of idle cells while still sending enough to let the far end regenerate them. Defaults to off.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.119.11.1.7 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-CircuitEmulationServiceMIB::aal1CesIdleSuppression
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.119.11.1.7.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-CircuitEmulationServiceMIB::aal1CesIdleSuppression.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.119.11.1.7.1 i <value>
Start monitoring Nortel Magellan Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-CircuitEmulationServiceMIB::aal1CesIdleSuppression OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport switches from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.119 | aal1Ces | Nortel-Magellan-Passport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.2.4.1.119.11 | aal1CesProvTable | Nortel-Magellan-Passport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.2.4.1.119.11.1 | aal1CesProvEntry | Nortel-Magellan-Passport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.2.4.1.119.11.1.7 | aal1CesIdleSuppression | Nortel-Magellan-Passport-CircuitEmulationServiceMIB |