Nortel-Magellan-Passport-BitTransparentMIB :: btdsPlcPermittedTrunkTypes

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-BitTransparentMIB › btdsPlcPermittedTrunkTypes

btdsPlcPermittedTrunkTypes

Module: Nortel-Magellan-Passport-BitTransparentMIB

OID (symbolic): Nortel-Magellan-Passport-BitTransparentMIB::btdsPlcPermittedTrunkTypes

OID (numeric): 1.3.6.1.4.1.562.2.4.1.81.3.10.1.8

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: This attribute lists up to eight(8) types of trunk that can be used on the route. The terrestrial and satellite trunk types have been defined, leaving six(6) remaining arbitrary types that can be defined by the network administration. The trunk's type is indicated in the trunkType attribute of the Trunk component. When selecting a route, PORS only chooses trunks whose trunkType are in the permittedTrunkTypes for the path.

Description of bits: terrestrial(0) satellite(1) trunkType1(2) trunkType2(3) trunkType3(4) trunkType4(5) trunkType5(6) trunkType6(7)

What is btdsPlcPermittedTrunkTypes?

Lists up to eight trunk types (terrestrial, satellite, plus up to six administrator-defined types) that route selection is allowed to use for this path; an admin restricts this bitmap to keep sensitive or latency-critical traffic off, for example, satellite trunks.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.81.3.10.1.8
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-BitTransparentMIB::btdsPlcPermittedTrunkTypes

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.81.3.10.1.8.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-BitTransparentMIB::btdsPlcPermittedTrunkTypes.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.81.3.10.1.8.1 s <value>

Start monitoring Nortel Magellan Passport multiservice WAN switch (bit-transparent circuit emulation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-BitTransparentMIB::btdsPlcPermittedTrunkTypes OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice WAN switch (bit-transparent circuit emulation) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.81btdsNortel-Magellan-Passport-BitTransparentMIB
1.3.6.1.4.1.562.2.4.1.81.3btdsPlcNortel-Magellan-Passport-BitTransparentMIB
1.3.6.1.4.1.562.2.4.1.81.3.10btdsPlcProvTableNortel-Magellan-Passport-BitTransparentMIB
1.3.6.1.4.1.562.2.4.1.81.3.10.1btdsPlcProvEntryNortel-Magellan-Passport-BitTransparentMIB
1.3.6.1.4.1.562.2.4.1.81.3.10.1.8btdsPlcPermittedTrunkTypesNortel-Magellan-Passport-BitTransparentMIB