Nortel-Magellan-Passport-BitTransparentMIB :: btdsMcdnAdjPbxSide

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-BitTransparentMIB › btdsMcdnAdjPbxSide

btdsMcdnAdjPbxSide

Module: Nortel-Magellan-Passport-BitTransparentMIB

OID (symbolic): Nortel-Magellan-Passport-BitTransparentMIB::btdsMcdnAdjPbxSide

OID (numeric): 1.3.6.1.4.1.562.2.4.1.81.6.10.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute holds the provisioning related to call collision resolution. Its value must be that same as in the adjacent PBX, at the other end of the PRI. To provision the call collision resolution in Nortel's SL1 and Meridian 1 PBXs, the network operator responds to the prompt SIDE by entering either MAS or SLAV. So if the SLAV was entered, then the adjPbxSide has to be provisioned slave.

What is btdsMcdnAdjPbxSide?

Configures which side (master or slave) of the call-collision resolution scheme this MCDN component represents, and must match the adjacent PBX's own MAS/SLAV prompt setting on Nortel SL1 or Meridian 1 systems; a mismatch here causes call collisions to resolve incorrectly.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.81.6.10.1.1
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-BitTransparentMIB::btdsMcdnAdjPbxSide

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.81.6.10.1.1.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-BitTransparentMIB::btdsMcdnAdjPbxSide.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.81.6.10.1.1.1 i <value>

Start monitoring Nortel Magellan Passport multiservice WAN switch (bit-transparent circuit emulation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-BitTransparentMIB::btdsMcdnAdjPbxSide OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice WAN switch (bit-transparent circuit emulation) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.81btdsNortel-Magellan-Passport-BitTransparentMIB
1.3.6.1.4.1.562.2.4.1.81.6btdsMcdnNortel-Magellan-Passport-BitTransparentMIB
1.3.6.1.4.1.562.2.4.1.81.6.10btdsMcdnProvTableNortel-Magellan-Passport-BitTransparentMIB
1.3.6.1.4.1.562.2.4.1.81.6.10.1btdsMcdnProvEntryNortel-Magellan-Passport-BitTransparentMIB
1.3.6.1.4.1.562.2.4.1.81.6.10.1.1btdsMcdnAdjPbxSideNortel-Magellan-Passport-BitTransparentMIB