All MIBs › Nortel-Magellan-Passport-BitTransparentMIB › btdsFramerTimeSlotAlignment
btdsFramerTimeSlotAlignment
Module: Nortel-Magellan-Passport-BitTransparentMIB
OID (symbolic): Nortel-Magellan-Passport-BitTransparentMIB::btdsFramerTimeSlotAlignment
OID (numeric): 1.3.6.1.4.1.562.2.4.1.81.2.11.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies the time slot alignment of this Btds. With time slot alignment, data sent out on a particular time slot to a link is received on the same time slot. A value of unaligned specifies the regular Btds application. A value of frameAligned enables frame aligned Btds. When framed aligned Btds is specified, only one channel may be provisioned since only one fraction of N x 64 kbit/s is presently available.
timeSlotAlignment can not be set to frameAligned unless this Btds is running on a DS1V, E1V, 1pDS1V or 1pE1V card timeSlotAlignment must have the same value at both ends of a Btds. If timeSlotAlignment does not have the same value at both ends of a Btds, the Btds will be out of service. In this case, Btds serviceFailureReason is mismatchedTimeSlotAlignment.
What is btdsFramerTimeSlotAlignment?
Controls whether data sent on a given timeslot returns on that same timeslot (frameAligned) or not (the regular unaligned mode); frameAligned mode only works on DS1V/E1V cards and limits provisioning to a single channel, and both ends of the Btds must match this setting or the link fails with a mismatchedTimeSlotAlignment service failure reason.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.81.2.11.1.10 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-BitTransparentMIB::btdsFramerTimeSlotAlignment
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.81.2.11.1.10.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-BitTransparentMIB::btdsFramerTimeSlotAlignment.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.81.2.11.1.10.1 i <value>
Start monitoring Nortel Magellan Passport multiservice WAN switch (bit-transparent circuit emulation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-BitTransparentMIB::btdsFramerTimeSlotAlignment OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice WAN switch (bit-transparent circuit emulation) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.81 | btds | Nortel-Magellan-Passport-BitTransparentMIB |
| 1.3.6.1.4.1.562.2.4.1.81.2 | btdsFramer | Nortel-Magellan-Passport-BitTransparentMIB |
| 1.3.6.1.4.1.562.2.4.1.81.2.11 | btdsFramerChannelTable | Nortel-Magellan-Passport-BitTransparentMIB |
| 1.3.6.1.4.1.562.2.4.1.81.2.11.1 | btdsFramerChannelEntry | Nortel-Magellan-Passport-BitTransparentMIB |
| 1.3.6.1.4.1.562.2.4.1.81.2.11.1.10 | btdsFramerTimeSlotAlignment | Nortel-Magellan-Passport-BitTransparentMIB |