All MIBs › Nortel-Magellan-Passport-BitTransparentMIB › btdsFramerInsertedOutputDelay
btdsFramerInsertedOutputDelay
Module: Nortel-Magellan-Passport-BitTransparentMIB
OID (symbolic): Nortel-Magellan-Passport-BitTransparentMIB::btdsFramerInsertedOutputDelay
OID (numeric): 1.3.6.1.4.1.562.2.4.1.81.2.11.1.11
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute defines the amount of added output delay to compensate for cross network delay variations. Cross network delay variations is a function of the network topology. Setting this attribute will allow the Btds service to deal with cross network delay variations. This attribute provides for delay in addition to the elastic buffer. Total egress delay is approximately the insertedOutputDelay plus the elastic buffer. The elastic buffer is the packetization timex5 cells in the buffer. Packetization time per cell is calculated by taking the inverse of [linespeed (kbits/sec) x (byte/8bits) x (1/cellsize (bytes))]. This value is msec.The value for insertedOutputDelay should be increased if the frmUnderRuns is increasing and frmLostInNetwork is not increasing.
What is btdsFramerInsertedOutputDelay?
Adds extra output delay, in milliseconds, on top of the elastic buffer to absorb cross-network delay variation; an admin increases this value if they see frmUnderRuns climbing while frmLostInNetwork stays flat, which points at jitter rather than packet loss.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.81.2.11.1.11 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-BitTransparentMIB::btdsFramerInsertedOutputDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.81.2.11.1.11.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-BitTransparentMIB::btdsFramerInsertedOutputDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.81.2.11.1.11.1 i <value>
Start monitoring Nortel Magellan Passport multiservice WAN switch (bit-transparent circuit emulation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-BitTransparentMIB::btdsFramerInsertedOutputDelay OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice WAN switch (bit-transparent circuit emulation) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.81 | btds | Nortel-Magellan-Passport-BitTransparentMIB |
| 1.3.6.1.4.1.562.2.4.1.81.2 | btdsFramer | Nortel-Magellan-Passport-BitTransparentMIB |
| 1.3.6.1.4.1.562.2.4.1.81.2.11 | btdsFramerChannelTable | Nortel-Magellan-Passport-BitTransparentMIB |
| 1.3.6.1.4.1.562.2.4.1.81.2.11.1 | btdsFramerChannelEntry | Nortel-Magellan-Passport-BitTransparentMIB |
| 1.3.6.1.4.1.562.2.4.1.81.2.11.1.11 | btdsFramerInsertedOutputDelay | Nortel-Magellan-Passport-BitTransparentMIB |