Nortel-Magellan-Passport-AtmNetworkingMIB :: aRtgPnniHelloInactivityFactor

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-AtmNetworkingMIB › aRtgPnniHelloInactivityFactor

aRtgPnniHelloInactivityFactor

Module: Nortel-Magellan-Passport-AtmNetworkingMIB

OID (symbolic): Nortel-Magellan-Passport-AtmNetworkingMIB::aRtgPnniHelloInactivityFactor

OID (numeric): 1.3.6.1.4.1.562.2.4.1.95.3.12.1.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the default number of Hello intervals allowed to pass without receiving a Hello from the neighbor node, before an attempt is made to re-stage, for routing control channels on this node. The hello inactivity timer is enabled in the oneWayInside, twoWayInside, oneWayOutside, twoWayOutside and commonOutside (see the helloState attribute on the Rcc component for a description of these states). Note that the value for the Hello interval used in the calculation is the one specified in the Hello packet from the neighbor node.

What is aRtgPnniHelloInactivityFactor?

Number of missed Hello intervals from a neighbor (using the neighbor's own advertised interval) before this node restages the adjacency, default 5; a higher value tolerates more packet loss before flagging the neighbor down.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.95.3.12.1.3
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmNetworkingMIB::aRtgPnniHelloInactivityFactor

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.95.3.12.1.3.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmNetworkingMIB::aRtgPnniHelloInactivityFactor.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.95.3.12.1.3.1 i <value>

Start monitoring Nortel Magellan Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmNetworkingMIB::aRtgPnniHelloInactivityFactor OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport switches from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.95aRtgNortel-Magellan-Passport-AtmNetworkingMIB
1.3.6.1.4.1.562.2.4.1.95.3aRtgPnniNortel-Magellan-Passport-AtmNetworkingMIB
1.3.6.1.4.1.562.2.4.1.95.3.12aRtgPnniHlParmsTableNortel-Magellan-Passport-AtmNetworkingMIB
1.3.6.1.4.1.562.2.4.1.95.3.12.1aRtgPnniHlParmsEntryNortel-Magellan-Passport-AtmNetworkingMIB
1.3.6.1.4.1.562.2.4.1.95.3.12.1.3aRtgPnniHelloInactivityFactorNortel-Magellan-Passport-AtmNetworkingMIB