Nortel-Magellan-Passport-AtmCoreMIB :: atmIfVptVpdTmTrafficShaping

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-AtmCoreMIB › atmIfVptVpdTmTrafficShaping

atmIfVptVpdTmTrafficShaping

Module: Nortel-Magellan-Passport-AtmCoreMIB

OID (symbolic): Nortel-Magellan-Passport-AtmCoreMIB::atmIfVptVpdTmTrafficShaping

OID (numeric): 1.3.6.1.4.1.562.2.4.1.114.9.2.2.100.1.50

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface.

This attribute is ignored if the atmServiceCategory is availableBitRate.

When sameAsCa is selected, traffic shaping for the connection is based on the trafficShaping attribute of the connection's service category component under the CA. If the service category has trafficShaping set to enabled or inverseUpc, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm, Vpc Tm, or Vpt Tm components.

When disabled is selected, traffic shaping for this connection is disabled regardless of the provisioning of the connection's service category component.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.9.2.2.100.1.50
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmCoreMIB::atmIfVptVpdTmTrafficShaping

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.9.2.2.100.1.50.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmCoreMIB::atmIfVptVpdTmTrafficShaping.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.114.9.2.2.100.1.50.1 i <value>

Start monitoring Nortel Magellan Passport ATM/Frame Relay WAN switch (ATM core fabric) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmCoreMIB::atmIfVptVpdTmTrafficShaping OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM/Frame Relay WAN switch (ATM core fabric) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.114atmIfNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.9atmIfVptNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.9.2atmIfVptVpdNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.9.2.2atmIfVptVpdTmNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.9.2.2.100atmIfVptVpdTmProvTableNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.9.2.2.100.1atmIfVptVpdTmProvEntryNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.9.2.2.100.1.50atmIfVptVpdTmTrafficShapingNortel-Magellan-Passport-AtmCoreMIB