All MIBs › Nortel-Magellan-Passport-AtmCoreMIB › atmIfVptVccVcdSegSwitchSideLoopback
atmIfVptVccVcdSegSwitchSideLoopback
Module: Nortel-Magellan-Passport-AtmCoreMIB
OID (symbolic): Nortel-Magellan-Passport-AtmCoreMIB::atmIfVptVccVcdSegSwitchSideLoopback
OID (numeric): 1.3.6.1.4.1.562.2.4.1.114.9.20.2.100.1.20
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies whether switch-side segment loopback insertion should be performed on this connection.
When sameAsInterface is selected, the switch-side segment loopback for the connection is based on the segSwitchSideLoopback attribute of the connection's parent AtmIf componentif the ATM interface has switch-side segment loopback insertion turned on, then switch-side segment loopback insertion is also on for the connection.
When on or off is selected, switch-side segment loopback insertion is turned on or off respectively for the connection regardless of the provisioning of the parent AtmIf component.
Note that switch-side segment loopback insertion is not possible if the connectionPointType attribute of the Vcc or Vpc component is connectingPoint or connectionEndPoint. Switch-side segment loopback insertion is also not possible if the distributionType of the Vcc is pointToMultipoint In such cases, the associated segSwitchSideLoopbackState attribute indicates notApplicable and switch-side segment loopback insertion is not performed. Switch- side segment loopback is never possible on a Vpt.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.9.20.2.100.1.20 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmCoreMIB::atmIfVptVccVcdSegSwitchSideLoopback
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.9.20.2.100.1.20.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmCoreMIB::atmIfVptVccVcdSegSwitchSideLoopback.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.114.9.20.2.100.1.20.1 i <value>
Start monitoring Nortel Magellan Passport ATM/Frame Relay WAN switch (ATM core fabric) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmCoreMIB::atmIfVptVccVcdSegSwitchSideLoopback OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM/Frame Relay WAN switch (ATM core fabric) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.114 | atmIf | Nortel-Magellan-Passport-AtmCoreMIB |
| 1.3.6.1.4.1.562.2.4.1.114.9 | atmIfVpt | Nortel-Magellan-Passport-AtmCoreMIB |
| 1.3.6.1.4.1.562.2.4.1.114.9.20 | atmIfVptVcc | Nortel-Magellan-Passport-AtmCoreMIB |
| 1.3.6.1.4.1.562.2.4.1.114.9.20.2 | atmIfVptVccVcd | Nortel-Magellan-Passport-AtmCoreMIB |
| 1.3.6.1.4.1.562.2.4.1.114.9.20.2.100 | atmIfVptVccVcdLbkTable | Nortel-Magellan-Passport-AtmCoreMIB |
| 1.3.6.1.4.1.562.2.4.1.114.9.20.2.100.1 | atmIfVptVccVcdLbkEntry | Nortel-Magellan-Passport-AtmCoreMIB |
| 1.3.6.1.4.1.562.2.4.1.114.9.20.2.100.1.20 | atmIfVptVccVcdSegSwitchSideLoopback | Nortel-Magellan-Passport-AtmCoreMIB |