Nortel-Magellan-Passport-AtmCoreMIB :: atmIfVptVccTestFrmTypes

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-AtmCoreMIB › atmIfVptVccTestFrmTypes

atmIfVptVccTestFrmTypes

Module: Nortel-Magellan-Passport-AtmCoreMIB

OID (symbolic): Nortel-Magellan-Passport-AtmCoreMIB::atmIfVptVccTestFrmTypes

OID (numeric): 1.3.6.1.4.1.562.2.4.1.114.9.20.6.110.1.10

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: This attribute specifies the types of the test frames to be transmitted during the ATM connection test. It must contain at least one of the following: loading: A set of 'loading frames' is circulated over the link as rapidly as possible. This frame type should be selected when the test is intended to verify the operation of the connection under a specified load. These frames are not checked for bit errors. verification: A single 'verification frame' is transmitted over the link; when the frame is returned, its contents are verified and the next verification frame in the series is transmitted. This frame type should be selected when the test is intended to verify that frames are not being corrupted as they pass over the connection.

Description of bits: loading(0) verification(1)

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.9.20.6.110.1.10
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmCoreMIB::atmIfVptVccTestFrmTypes

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.9.20.6.110.1.10.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmCoreMIB::atmIfVptVccTestFrmTypes.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.114.9.20.6.110.1.10.1 s <value>

Start monitoring Nortel Magellan Passport ATM/Frame Relay WAN switch (ATM core fabric) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmCoreMIB::atmIfVptVccTestFrmTypes OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM/Frame Relay WAN switch (ATM core fabric) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.114atmIfNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.9atmIfVptNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.9.20atmIfVptVccNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.9.20.6atmIfVptVccTestNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.9.20.6.110atmIfVptVccTestSetupTableNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.9.20.6.110.1atmIfVptVccTestSetupEntryNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.9.20.6.110.1.10atmIfVptVccTestFrmTypesNortel-Magellan-Passport-AtmCoreMIB