Nortel-Magellan-Passport-AtmCoreMIB :: atmIfVptCAUbrMaxVccs

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-AtmCoreMIB › atmIfVptCAUbrMaxVccs

atmIfVptCAUbrMaxVccs

Module: Nortel-Magellan-Passport-AtmCoreMIB

OID (symbolic): Nortel-Magellan-Passport-AtmCoreMIB::atmIfVptCAUbrMaxVccs

OID (numeric): 1.3.6.1.4.1.562.2.4.1.114.9.5.6.100.1.6

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the maximum number of UBR Vccs that can be configured associated with this Vpt. The value must not exceed the maxVccs attribute of the parent Vpt CA component.

If this attribute is set to sameAsCa, the maximum number of UBR Vccs is the same as specified by the maxVccs attribute of the Vpt CA.

Changes to this attribute are not critical to the Vpt. If the value is changed to a number smaller than the current number of active VCCs, no new VCCs can be admitted until the number of active VCCs drops below the value of this attribute. The current number of active VCCs is indicated by the sum of the permanentVccs and switchedVccs operational attribute under the Vpt CA component.

VALUES (

16385 = sameAsCa

)

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.9.5.6.100.1.6
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmCoreMIB::atmIfVptCAUbrMaxVccs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.9.5.6.100.1.6.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmCoreMIB::atmIfVptCAUbrMaxVccs.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.114.9.5.6.100.1.6.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> atmIfVptCAUbrMaxVccs.1

Start monitoring Nortel Magellan Passport ATM/Frame Relay WAN switch (ATM core fabric) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmCoreMIB::atmIfVptCAUbrMaxVccs OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM/Frame Relay WAN switch (ATM core fabric) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.114atmIfNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.9atmIfVptNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.9.5atmIfVptCANortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.9.5.6atmIfVptCAUbrNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.9.5.6.100atmIfVptCAUbrProvTableNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.9.5.6.100.1atmIfVptCAUbrProvEntryNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.9.5.6.100.1.6atmIfVptCAUbrMaxVccsNortel-Magellan-Passport-AtmCoreMIB