Nortel-Magellan-Passport-AtmCoreMIB :: atmIfVpcVpdTmAbrRateIncreaseFactor

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-AtmCoreMIB › atmIfVpcVpdTmAbrRateIncreaseFactor

atmIfVpcVpdTmAbrRateIncreaseFactor

Module: Nortel-Magellan-Passport-AtmCoreMIB

OID (symbolic): Nortel-Magellan-Passport-AtmCoreMIB::atmIfVpcVpdTmAbrRateIncreaseFactor

OID (numeric): 1.3.6.1.4.1.562.2.4.1.114.4.2.2.2.110.1.14

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the Rate Increase Factor (RIF) for this connection. The RIF value is computed by using the provisioned value of this attribute, n, as 2 to the inverse power n. For example, if the value of this attribute is 6, RIF is 2E-6 = 1/64.

RIF controls the amount by which the cell transmission rate may increase upon receipt of a backward Resource Management (RM) cell. For example, if a backward RM cell is received with the Congestion Indication (CI) and the No Increase (NI) fields both set to 0, the Allowed Cell Rate (ACR) value would be increased by the amount (RIF*ACR). The ACR is not allowed to exceed the Peak Cell Rate (PCR), in which case the ACR is set to PCR.

This attribute is ignored under all conditions where the operational attribute abrConnectionType has the value erSwitch.

VALUES (

16777216 = sameAsCa

)

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.4.2.2.2.110.1.14
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmCoreMIB::atmIfVpcVpdTmAbrRateIncreaseFactor

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.4.2.2.2.110.1.14.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmCoreMIB::atmIfVpcVpdTmAbrRateIncreaseFactor.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.114.4.2.2.2.110.1.14.1 i <value>

Start monitoring Nortel Magellan Passport ATM/Frame Relay WAN switch (ATM core fabric) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmCoreMIB::atmIfVpcVpdTmAbrRateIncreaseFactor OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM/Frame Relay WAN switch (ATM core fabric) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.114atmIfNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.4atmIfVpcNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.4.2atmIfVpcVpdNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.4.2.2atmIfVpcVpdTmNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.4.2.2.2atmIfVpcVpdTmAbrNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.4.2.2.2.110atmIfVpcVpdTmAbrProvTableNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.4.2.2.2.110.1atmIfVpcVpdTmAbrProvEntryNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.4.2.2.2.110.1.14atmIfVpcVpdTmAbrRateIncreaseFactorNortel-Magellan-Passport-AtmCoreMIB