Nortel-Magellan-Passport-AtmCoreMIB :: atmIfVpcTmAbrRateDecreaseFactor

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-AtmCoreMIB › atmIfVpcTmAbrRateDecreaseFactor

atmIfVpcTmAbrRateDecreaseFactor

Module: Nortel-Magellan-Passport-AtmCoreMIB

OID (symbolic): Nortel-Magellan-Passport-AtmCoreMIB::atmIfVpcTmAbrRateDecreaseFactor

OID (numeric): 1.3.6.1.4.1.562.2.4.1.114.4.9.2.110.1.13

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: This attribute is applicable and is displayed only for connections for which the operational Tm abrConnectionType is displayed as sourceDest or virtualSourceDest.

This attribute indicates the Rate Decrease Factor (RDF) for this connection. The RDF value is computed by using the operational value of this attribute, n, as 2 to the inverse power n. For example, if the value of this attribute is 8, RDF is 2E-8 = 1/256.

RDF controls the amount by which the cell transmission rate may decrease upon receipt of a backward Resource Management (RM) cell. For example, if a backward RM cell is received with the Congestion Indication (CI) field set to 1, the Allowed Cell Rate (ACR) value would be reduced by the amount (RDF*ACR). The ACR is not allowed to fall below the Minimum Cell Rate (MCR), in which case the ACR is set to MCR.

For nailed-up connections, this attribute is determined by the provisioned value of the rateDecreaseFactor attribute. For signalled connections, it is indicated in the ABR Setup Parameters Information Element.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.4.9.2.110.1.13
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmCoreMIB::atmIfVpcTmAbrRateDecreaseFactor

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.4.9.2.110.1.13.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmCoreMIB::atmIfVpcTmAbrRateDecreaseFactor.1

Start monitoring Nortel Magellan Passport ATM/Frame Relay WAN switch (ATM core fabric) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmCoreMIB::atmIfVpcTmAbrRateDecreaseFactor OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM/Frame Relay WAN switch (ATM core fabric) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.114atmIfNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.4atmIfVpcNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.4.9atmIfVpcTmNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.4.9.2atmIfVpcTmAbrNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.4.9.2.110atmIfVpcTmAbrOperTableNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.4.9.2.110.1atmIfVpcTmAbrOperEntryNortel-Magellan-Passport-AtmCoreMIB
1.3.6.1.4.1.562.2.4.1.114.4.9.2.110.1.13atmIfVpcTmAbrRateDecreaseFactorNortel-Magellan-Passport-AtmCoreMIB