All MIBs › Nortel-Magellan-Passport-AtmCoreMIB › atmIfCACbrUsageParameterControl
atmIfCACbrUsageParameterControl
Module: Nortel-Magellan-Passport-AtmCoreMIB
OID (symbolic): Nortel-Magellan-Passport-AtmCoreMIB::atmIfCACbrUsageParameterControl
OID (numeric): 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.170
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies the default usage parameter control (UPC) option for connections of the CBR service category. This attribute is ignored if the rxTrafficDescriptorType indicates 1 or 2. An override to this default may be specified for a provisioned connection under the Vcd Tm or Vpd Tm component.
When this attribute is set to enforced, UPC is enforced by default for each connection. When UPC is enforced, non-conforming cells are either tagged or discarded depending on the rxTrafficDescriptorType.
On ATM IP FPs, when this attribute is set to monitored, UPC conformance checking is performed, except, instead of the non- conforming cells being tagged or discarded, they are merely counted in the UPC violations counts, and passed on unchanged.
On CQC-based ATM FPs, when this attribute is set to monitored, it has the same effect as setting it to disabled.
When this attribute is set to disabled, UPC is disabled on the receive path for all CBR connections.
This attribute does not apply to standard Vpt Vccs and basic Vpts.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.170 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmCoreMIB::atmIfCACbrUsageParameterControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.170.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmCoreMIB::atmIfCACbrUsageParameterControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.170.1 i <value>
Start monitoring Nortel Magellan Passport ATM/Frame Relay WAN switch (ATM core fabric) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmCoreMIB::atmIfCACbrUsageParameterControl OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM/Frame Relay WAN switch (ATM core fabric) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.114 | atmIf | Nortel-Magellan-Passport-AtmCoreMIB |
| 1.3.6.1.4.1.562.2.4.1.114.3 | atmIfCA | Nortel-Magellan-Passport-AtmCoreMIB |
| 1.3.6.1.4.1.562.2.4.1.114.3.2 | atmIfCACbr | Nortel-Magellan-Passport-AtmCoreMIB |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100 | atmIfCACbrProvTable | Nortel-Magellan-Passport-AtmCoreMIB |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1 | atmIfCACbrProvEntry | Nortel-Magellan-Passport-AtmCoreMIB |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.170 | atmIfCACbrUsageParameterControl | Nortel-Magellan-Passport-AtmCoreMIB |