All MIBs › Nortel-Magellan-Passport-AtmCoreMIB › atmIfCAAbrInitialCellRate
atmIfCAAbrInitialCellRate
Module: Nortel-Magellan-Passport-AtmCoreMIB
OID (symbolic): Nortel-Magellan-Passport-AtmCoreMIB::atmIfCAAbrInitialCellRate
OID (numeric): 1.3.6.1.4.1.562.2.4.1.114.3.5.100.1.23
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute specifies the default Initial Cell Rate (ICR) parameter for ABR connections. An override to this default may be specified for a provisioned connection under the Vcd Tm Abr or Vpd Tm Abr component, or signalled in the ABR Setup Parameters Information Element.
ICR is the rate at which a source should send initially and after an idle period.
When this attribute is set to useMcr, ICR is set to the same value as the Minimum Cell Rate (MCR) for the connection.
When this attribute is set to usePcr, ICR is set to the same value as the Peak Cell Rate (PCR) for the connection.
When this attribute is set to some explicit number, that number is used as the ICR, provided it is between MCR and PCR. If the explicit number is below MCR, then MCR is used as ICR. If the explicit number is above PCR, then PCR is used as ICR.
VALUES (
16777217 = useMcr
16777218 = usePcr
)
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.3.5.100.1.23 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmCoreMIB::atmIfCAAbrInitialCellRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.3.5.100.1.23.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmCoreMIB::atmIfCAAbrInitialCellRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.114.3.5.100.1.23.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> atmIfCAAbrInitialCellRate.1
Start monitoring Nortel Magellan Passport ATM/Frame Relay WAN switch (ATM core fabric) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmCoreMIB::atmIfCAAbrInitialCellRate OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM/Frame Relay WAN switch (ATM core fabric) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.114 | atmIf | Nortel-Magellan-Passport-AtmCoreMIB |
| 1.3.6.1.4.1.562.2.4.1.114.3 | atmIfCA | Nortel-Magellan-Passport-AtmCoreMIB |
| 1.3.6.1.4.1.562.2.4.1.114.3.5 | atmIfCAAbr | Nortel-Magellan-Passport-AtmCoreMIB |
| 1.3.6.1.4.1.562.2.4.1.114.3.5.100 | atmIfCAAbrProvTable | Nortel-Magellan-Passport-AtmCoreMIB |
| 1.3.6.1.4.1.562.2.4.1.114.3.5.100.1 | atmIfCAAbrProvEntry | Nortel-Magellan-Passport-AtmCoreMIB |
| 1.3.6.1.4.1.562.2.4.1.114.3.5.100.1.23 | atmIfCAAbrInitialCellRate | Nortel-Magellan-Passport-AtmCoreMIB |