All MIBs › Nortel-Magellan-Passport-ApsMIB › apsAlarmStatus
apsAlarmStatus
Module: Nortel-Magellan-Passport-ApsMIB
OID (symbolic): Nortel-Magellan-Passport-ApsMIB::apsAlarmStatus
OID (numeric): 1.3.6.1.4.1.562.2.4.1.134.12.1.7
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present.
The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component.
Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
What is apsAlarmStatus?
This read-only 1-byte OID reports OSI alarm status conditions such as underRepair, critical, major, minor, or alarmOutstanding, as a bitmask with at most one shown to the user. It's the quick-glance field admins check to see if any alarm is currently outstanding against the APS component.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.134.12.1.7 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-ApsMIB::apsAlarmStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.134.12.1.7.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-ApsMIB::apsAlarmStatus.1
Start monitoring Nortel Magellan Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-ApsMIB::apsAlarmStatus OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport switches from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.134 | aps | Nortel-Magellan-Passport-ApsMIB |
| 1.3.6.1.4.1.562.2.4.1.134.12 | apsStateTable | Nortel-Magellan-Passport-ApsMIB |
| 1.3.6.1.4.1.562.2.4.1.134.12.1 | apsStateEntry | Nortel-Magellan-Passport-ApsMIB |
| 1.3.6.1.4.1.562.2.4.1.134.12.1.7 | apsAlarmStatus | Nortel-Magellan-Passport-ApsMIB |