All MIBs › NSTACK-MIB › nbsStackSlotSpecUplRedundantMode
nbsStackSlotSpecUplRedundantMode
Module: NSTACK-MIB
OID (symbolic): NSTACK-MIB::nbsStackSlotSpecUplRedundantMode
OID (numeric): 1.3.6.1.4.1.629.1.50.4.7.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Special Slot Additional Status: other=(1) - unknown Status or Module is not Valid; specialRedundant=(2) - Both connectors of the GigaBit Redundant Module are connected to the same 2 connectors of the other GigaBit Redundant Module. Module provides automatic quick Redundancy; autoRedundant=(3) - Each connector of the GigaBit Redundant Module is connected to the Single GigaBit Ethernet Module. Module provides automatic quick Redundancy; manualLeftRedundant =(4), manualRightRedundant=(5) - Each connector of the GigaBit Redundant Module is connected to the Single GigaBit Ethernet Module. Module will force the Link in its Left Connector as a primary Link, in case of (4). Module will force the Link in its Right Connector as a primary Link, in case of (5)
What is nbsStackSlotSpecUplRedundantMode?
A read-write enumeration configuring how a GigaBit redundant uplink module fails over: specialRedundant and autoRedundant provide automatic quick redundancy between connectors, while manualLeftRedundant/manualRightRedundant force the left or right connector to be treated as primary.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.629.1.50.4.7.1.3 snmpwalk -v2c -c public <target> NSTACK-MIB::nbsStackSlotSpecUplRedundantMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.629.1.50.4.7.1.3.1 snmpget -v2c -c public <target> NSTACK-MIB::nbsStackSlotSpecUplRedundantMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.629.1.50.4.7.1.3.1 i <value>
Start monitoring Networking switch/appliance running NSTACK software (nbase lineage) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NSTACK-MIB::nbsStackSlotSpecUplRedundantMode OID value, configure state conditions and alerts, and monitor any Networking switch/appliance running NSTACK software (nbase lineage) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.629 | nbase | GSWITCH-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.629.1 | nbSwitchG1 | NSTACK-MIB |
| 1.3.6.1.4.1.629.1.50 | nbSwitchG1Il | NSTACK-MIB |
| 1.3.6.1.4.1.629.1.50.4 | nbsStackInfo | NSTACK-MIB |
| 1.3.6.1.4.1.629.1.50.4.7 | nbsStackSpecSlotTable | NSTACK-MIB |
| 1.3.6.1.4.1.629.1.50.4.7.1 | nbsStackSpecSlotEntry | NSTACK-MIB |
| 1.3.6.1.4.1.629.1.50.4.7.1.3 | nbsStackSlotSpecUplRedundantMode | NSTACK-MIB |