All MIBs › NSCDXGLIP-MIB › nscDxGlProfCuEntRmtStartingDevAddr
nscDxGlProfCuEntRmtStartingDevAddr
Module: NSCDXGLIP-MIB
OID (symbolic): NSCDXGLIP-MIB::nscDxGlProfCuEntRmtStartingDevAddr
OID (numeric): 1.3.6.1.4.1.10.2.1.3.4.2.1.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
The first remote device address in the range of addresses associated with the specified controller definition. This can be used only to map addresses recognized by the host to different addresses at the device. If address mapping is not used, nscDxGlProfCuEntRmtStartingDevAddr should be the same as nscDxGlProfCuEntHostStartingDevAddr.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.10.2.1.3.4.2.1.1.11 snmpwalk -v2c -c public <target> NSCDXGLIP-MIB::nscDxGlProfCuEntRmtStartingDevAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.10.2.1.3.4.2.1.1.11.1 snmpget -v2c -c public <target> NSCDXGLIP-MIB::nscDxGlProfCuEntRmtStartingDevAddr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.10.2.1.3.4.2.1.1.11.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.10 | nsc | NSC-MIB |
| 1.3.6.1.4.1.10.2 | nscMib | NSC-MIB |
| 1.3.6.1.4.1.10.2.1 | nscProducts | NSC-MIB |
| 1.3.6.1.4.1.10.2.1.3 | nscDx | NSC-MIB |
| 1.3.6.1.4.1.10.2.1.3.4 | nscDxGreenline | NSCDXGLIP-MIB |
| 1.3.6.1.4.1.10.2.1.3.4.2 | nscDxGlProfiles | NSCDXGLIP-MIB |
| 1.3.6.1.4.1.10.2.1.3.4.2.1 | nscDxGlProfControlUnitTable | NSCDXGLIP-MIB |
| 1.3.6.1.4.1.10.2.1.3.4.2.1.1 | nscDxGlProfControlUnitEntry | NSCDXGLIP-MIB |
| 1.3.6.1.4.1.10.2.1.3.4.2.1.1.11 | nscDxGlProfCuEntRmtStartingDevAddr | NSCDXGLIP-MIB |