All MIBs › NOTIFICATION-LOG-MIB › nlmConfigGlobalEntryLimit
nlmConfigGlobalEntryLimit
Module: NOTIFICATION-LOG-MIB
OID (symbolic): NOTIFICATION-LOG-MIB::nlmConfigGlobalEntryLimit
OID (numeric): 1.3.6.1.2.1.92.1.1.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The maximum number of notification entries that may be held in nlmLogTable for all nlmLogNames added together. A particular setting does not guarantee that much data can be held.
If an application changes the limit while there are Notifications in the log, the oldest Notifications MUST be discarded to bring the log down to the new limit - thus the value of nlmConfigGlobalEntryLimit MUST take precedence over the values of nlmConfigGlobalAgeOut and nlmConfigLogEntryLimit, even if the Notification being discarded has been present for fewer minutes than the value of nlmConfigGlobalAgeOut, or if the named log has fewer entries than that specified in nlmConfigLogEntryLimit.
A value of 0 means no limit.
Please be aware that contention between multiple managers trying to set this object to different values MAY affect the reliability and completeness of data seen by each manager.
What is nlmConfigGlobalEntryLimit?
Caps the total number of notification entries that may be held across all named logs combined, with 0 (the default) meaning no limit. Because this global limit takes precedence over any per-log limit or age-out, an admin sizing notification retention on a busy device should set this first as the overall ceiling.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.92.1.1.1 snmpwalk -v2c -c public <target> NOTIFICATION-LOG-MIB::nlmConfigGlobalEntryLimit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.92.1.1.1.1 snmpget -v2c -c public <target> NOTIFICATION-LOG-MIB::nlmConfigGlobalEntryLimit.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.92.1.1.1.1 i <value>
Start monitoring Vendor-neutral IETF standard (any SNMP-capable device, trap/inform logging) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NOTIFICATION-LOG-MIB::nlmConfigGlobalEntryLimit OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (any SNMP-capable device, trap/inform logging) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.92 | notificationLogMIB | NOTIFICATION-LOG-MIB |
| 1.3.6.1.2.1.92.1 | notificationLogMIBObjects | NOTIFICATION-LOG-MIB |
| 1.3.6.1.2.1.92.1.1 | nlmConfig | NOTIFICATION-LOG-MIB |
| 1.3.6.1.2.1.92.1.1.1 | nlmConfigGlobalEntryLimit | NOTIFICATION-LOG-MIB |