All MIBs › NMS510-MIB › nms510ExtPortCtrlOut2
nms510ExtPortCtrlOut2
Module: NMS510-MIB
OID (symbolic): NMS510-MIB::nms510ExtPortCtrlOut2
OID (numeric): 1.3.6.1.4.1.498.8.6.2.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This option sets the external output state (on/off) of the current network element and displays the external output.
What is nms510ExtPortCtrlOut2?
Sets and reports the on/off state of the second external control output on the unit, used to drive an external relay or indicator.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.8.6.2.1.12 snmpwalk -v2c -c public <target> NMS510-MIB::nms510ExtPortCtrlOut2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.8.6.2.1.12.1 snmpget -v2c -c public <target> NMS510-MIB::nms510ExtPortCtrlOut2.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.498.8.6.2.1.12.1 i <value>
Start monitoring NMS Communications NMS510 device (DSU/CSU or similar telecom line unit) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NMS510-MIB::nms510ExtPortCtrlOut2 OID value, configure state conditions and alerts, and monitor any NMS Communications NMS510 device (DSU/CSU or similar telecom line unit) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.498 | gdc | DMA200-MIB |
| 1.3.6.1.4.1.498.8 | dsu | DDS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498.8.6 | nms510 | NMS510-MIB |
| 1.3.6.1.4.1.498.8.6.2 | nms510UnitCfgTable | NMS510-MIB |
| 1.3.6.1.4.1.498.8.6.2.1 | nms510UnitCfgEntry | NMS510-MIB |
| 1.3.6.1.4.1.498.8.6.2.1.12 | nms510ExtPortCtrlOut2 | NMS510-MIB |