All MIBs › NMS510-MIB › nms510DiagNetworkDelay
nms510DiagNetworkDelay
Module: NMS510-MIB
OID (symbolic): NMS510-MIB::nms510DiagNetworkDelay
OID (numeric): 1.3.6.1.4.1.498.8.6.7.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: To initiate a Network Delay test SET this object and specifiy runDelayTest. Both the remote (nms510) and master (sc5520) units will go into a test to measure network delay. Emun 3 is write only. The only valid responses to a READ are delayTestOn(2) or delayTestOff(1). This test will terminate after 10 seconds. Test results should be read only after the test is completed and are available from the master (sc5520) unit. The current Test Status can be obtained by reading the sc5520DiagTestStatus object on the master unit, reading test status on the remote unit may interfere with the test and cause errors. This test can not be terminated early once it is started.
What is nms510DiagNetworkDelay?
Setting this to runDelayTest(3) starts a 10-second network-delay measurement between the remote and master units; reading returns delayTestOn(2) or delayTestOff(1), and results are read from the master unit once done.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.8.6.7.1.5 snmpwalk -v2c -c public <target> NMS510-MIB::nms510DiagNetworkDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.8.6.7.1.5.1 snmpget -v2c -c public <target> NMS510-MIB::nms510DiagNetworkDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.498.8.6.7.1.5.1 i <value>
Start monitoring NMS Communications NMS510 device (DSU/CSU or similar telecom line unit) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NMS510-MIB::nms510DiagNetworkDelay OID value, configure state conditions and alerts, and monitor any NMS Communications NMS510 device (DSU/CSU or similar telecom line unit) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.498 | gdc | DMA200-MIB |
| 1.3.6.1.4.1.498.8 | dsu | DDS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498.8.6 | nms510 | NMS510-MIB |
| 1.3.6.1.4.1.498.8.6.7 | nms510DiagExcTable | NMS510-MIB |
| 1.3.6.1.4.1.498.8.6.7.1 | nms510DiagExcEntry | NMS510-MIB |
| 1.3.6.1.4.1.498.8.6.7.1.5 | nms510DiagNetworkDelay | NMS510-MIB |