All MIBs › NMS-553-MIB › nms553NetworkOnesDensity
nms553NetworkOnesDensity
Module: NMS-553-MIB
OID (symbolic): NMS-553-MIB::nms553NetworkOnesDensity
OID (numeric): 1.3.6.1.4.1.498.6.7.3.2.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The ones density restriction for the interface. The values of this object define the ones density restriction that is enforced on the interface.
The value inhibit(1) indicates that no ones density restriction is enforced.
The value max15zeros(2) indicates that a maximum of 15 zeros are transmitted to the network before a one is inserted.
The value max39zeros(3) indicates that a maximum of 39 zeros are transmitted to the network before a one is inserted.
The value restrict8nX1(4) indicates a minimum of N ones per 8(N+1) bits, where N is in the range 1 to 24.
The value min1in8(5) indicates a minimum of 1 one per 8 bits. With this value, pulse density violations are enforced but not recorded.
What is nms553NetworkOnesDensity?
Selects the ones-density enforcement policy for this DS1 interface: no restriction, a maximum run of 15 or 39 zeros before a one is inserted, a minimum-N-ones-per-8(N+1)-bits rule, or a strict minimum of one 1 per 8 bits (with violations enforced but not logged). It ensures the transmitted signal meets the pulse-density requirements DS1 lines depend on for clock recovery.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.6.7.3.2.1.8 snmpwalk -v2c -c public <target> NMS-553-MIB::nms553NetworkOnesDensity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.6.7.3.2.1.8.1 snmpget -v2c -c public <target> NMS-553-MIB::nms553NetworkOnesDensity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.498.6.7.3.2.1.8.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> nms553NetworkOnesDensity.1
Start monitoring General DataComm NMS-553-series equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NMS-553-MIB::nms553NetworkOnesDensity OID value, configure state conditions and alerts, and monitor any General DataComm NMS-553-series equipment from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.498 | gdc | DMA200-MIB |
| 1.3.6.1.4.1.498.6 | dsx1 | GDC-5553-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498.6.7 | nms553 | NMS-553-MIB |
| 1.3.6.1.4.1.498.6.7.3 | nms553Configuration | NMS-553-MIB |
| 1.3.6.1.4.1.498.6.7.3.2 | nms553NetworkConfigTable | NMS-553-MIB |
| 1.3.6.1.4.1.498.6.7.3.2.1 | nms553NetworkConfigEntry | NMS-553-MIB |
| 1.3.6.1.4.1.498.6.7.3.2.1.8 | nms553NetworkOnesDensity | NMS-553-MIB |