All MIBs › NMS-553-MIB › nms553DiagTestResults
nms553DiagTestResults
Module: NMS-553-MIB
OID (symbolic): NMS-553-MIB::nms553DiagTestResults
OID (numeric): 1.3.6.1.4.1.498.6.7.5.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The results of the last diagnostic test. This can be the current test running or the last completed test.
The units of the value of this object depend on the type of diagnostic test run. For all cases except a network delay measurement, the units of the value of this object is the number of bit errors that occurred. Bit errors can be read at any time during the duration of the test. The valid range for bit errors is 0 to 4,095. 65,535 will be returned if for any reason the test was terminated early. 32,770 will be returned if the number of bit errors exceeds 4,095. For a network delay measurement, the units of the value of this test are milliseconds. If the test is terminated early then 65,535 will be returned and if the delay is greater than 4,095 then 32,770 will be returned.
What is nms553DiagTestResults?
The result of the last (or currently running) diagnostic test on this interface: for all tests except a network delay measurement, the value is a bit-error count (0-4,095, with 32,770 meaning the error count exceeded that range and 65,535 meaning the test ended early); for a network delay measurement, the same value ranges are interpreted as milliseconds instead. Bit errors, or delay, can be read at any point during the test, not only after it completes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.6.7.5.1.1.6 snmpwalk -v2c -c public <target> NMS-553-MIB::nms553DiagTestResults
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.6.7.5.1.1.6.1 snmpget -v2c -c public <target> NMS-553-MIB::nms553DiagTestResults.1
Start monitoring General DataComm NMS-553-series equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NMS-553-MIB::nms553DiagTestResults OID value, configure state conditions and alerts, and monitor any General DataComm NMS-553-series equipment from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.498 | gdc | DMA200-MIB |
| 1.3.6.1.4.1.498.6 | dsx1 | GDC-5553-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498.6.7 | nms553 | NMS-553-MIB |
| 1.3.6.1.4.1.498.6.7.5 | nms553Diagnostics | NMS-553-MIB |
| 1.3.6.1.4.1.498.6.7.5.1 | nms553DiagTable | NMS-553-MIB |
| 1.3.6.1.4.1.498.6.7.5.1.1 | nms553DiagEntry | NMS-553-MIB |
| 1.3.6.1.4.1.498.6.7.5.1.1.6 | nms553DiagTestResults | NMS-553-MIB |