NEXANS-BM-MIB :: adminTftpAccess

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › NEXANS-BM-MIB › adminTftpAccess

adminTftpAccess

Module: NEXANS-BM-MIB

OID (symbolic): NEXANS-BM-MIB::adminTftpAccess

OID (numeric): 1.3.6.1.4.1.266.20.2.17

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: If 'TFTP authentication via SNMP' is disabled, this value is allways tftpAccessDisable(1). If 'TFTP authentication via SNMP' is read/only or read/write, an this object is read, the value is tftpAccessReadOnly(2) and the agent allowes a single TFTP read access of the switch configuration. If 'TFTP authentication via SNMP' is read/write, this value can be set to tftpAccessReadWrite(3) and the agent allowes a single TFTP read or write access to the configuration or a single firmware upgrade. After finishing the TFTP transfer, this value will return to ftpAccessDisable(1) automatically. Note: If the 'NexMan authentication mode' is set to 'none', TFTP read and write access is allways allowed.

What is adminTftpAccess?

Controls one-time TFTP access to the switch's configuration or firmware over SNMP: tftpAccessReadOnly(2) allows a single read, tftpAccessReadWrite(3) allows a single read/write or firmware upgrade, and the value automatically reverts to tftpAccessDisable(1) once the transfer finishes.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.266.20.2.17
snmpwalk -v2c -c public <target> NEXANS-BM-MIB::adminTftpAccess

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.266.20.2.17.1
snmpget -v2c -c public <target> NEXANS-BM-MIB::adminTftpAccess.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.266.20.2.17.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> adminTftpAccess.1

Start monitoring Nexans Advanced Networking Solutions switching equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NEXANS-BM-MIB::adminTftpAccess OID value, configure state conditions and alerts, and monitor any Nexans Advanced Networking Solutions switching equipment from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.266nexansANSNEXANS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.266.20bmSwitchMIBNEXANS-BM-MIB
1.3.6.1.4.1.266.20.2bmSwitchAdminNEXANS-BM-MIB
1.3.6.1.4.1.266.20.2.17adminTftpAccessNEXANS-BM-MIB